The Cape Dory Board

I have the complete assembly from boom to track on deck. It is in excellent condition. You pay shipping plus $50. Please PM me

if you want to go to Great Bay Marine at newington you have to have your mast unstepped at a dock that they use on the river in order to get under the General Sullivan bridge. I would call Kittery boatyard for a price or Great Cove marina

Joe, I installed the Harken Carbo Furling Lead Block Kit. This keeps the furling line off the deck and gives you a better purchase to pull the furling line. The last block is mounted on the aft stanchion and it rotates so you're pulling up. It also has a ratchet feature that puts a slight drag on th...

I repowered my 25D in 2014. Like you I intend to keep the boat. You will be amazed at the lack of vibration and smoothness compared to the 1GM. It was worth every penny. Stanley at Beta is a wealth of knowledge. PM me for any questions.

Hi Bob, The owner of that 25d just bought it a year ago and currently has no place to keep it in the water. I think he just wants to get out from under the storage fees etc plus he changed jobs. Hopefully I'll see you this summer, hope the traveller install goes ok, I'd like to see the finished inst...

Apr 21 Cape Dory 25D $8400 (Eliot Maine) pic map [x] This is in craigs list new hampshire. This boat was in my harbor last summer, It is a bargain at that price. It is one of the last 25d's and has a 2cylinder westerbeke from the factory.If you're looking for a 25d check it out

I had a Beta 14 installed last winter and have put 50 hours on it this year. I had it installed by a shop here that is a Beta dealer. I think my installation is superior to the Tim Lackey product because they modified the beds and moved the engine forward about 4 or 5 inches. Consequently there is p...

Dick, I installed a 90 elbow as someone else suggested, it works fine. While you're in there you might want to grind some of the fiberglass and foam directly behind the barrel of the cockpit drain so you can service it.

one thing to keep in mind on the 25d is the proximity of the starboard dorade to the back of the engine control panel. I 've always worried that water could get on the back of the conrol panel so I replaced mine with the wire reinforced flex hose, just in case.

Bill, you definitely should cut the shaft with a sawzall rather than risk bending the output flange on the transmission . Your existing shaft may already not pass muster. It'll be a much better job with a new shaft and cutlass bearing, as Gary said you don't want to do it over. It's 8 degrees in sou...

I have a 25D also. The set screws are at 3 o'clock and 9 o'clock on the outside. You only need to sand down the fairing compound to find them, you don't need to use a grinder. Mine also had two set screws on the inside, you'll see them after you remove the hose.

for sale yanmar 1gm diesel. Good running takeout. Runs and starts flawlessly, no smoke, no strange noises. Head redone in 2009, external oil lines replaced in 2010. Exhaust elbow is perfect. Located in southern Maine, come hear it run before Oct 22nd. Transmission included. Will deliver up to 100 mi...

Hi Bob,
Congratulations on your new boat. I know you'll really enjoy it. As already posted the only things that are bonded are the mast, the rigging, and the bronze seacocks. I also have a 25D and am moored at Pepperrell Cove in Kittery. Maybe we'll see each other this summer.
Frank

:) I purchased new blocks from Shaeffer three years ago and they fit perfectly. I'll look around for my old blocks. You could also drill out the rivets and just replace the wheels.

is it still available?