Leoma hull to deck joint

[JD-MDR]

A couple guys spent the week with fairing compound and sandpaper then yesterday put two coats of high build primer. I think they will finish painting this week. I may have to cut back on some metal work. I need to see my bill after paint. We will see

[John Stone]

JMD
So you are doing this in Mexico? How far down the coast? You are staying ashore I assume? Have you decided about the toe rail or bulwarks? While I would have preferred they do this with a couple layers of biaxial I am sure it's going to be great. I learned about this from Hal Roth on his Spencer 35 Whisper. I don't think he used biaxial. I also don't think it really matters they didn't remove the chainplates. They are set far enough inboard there should be plenty of cloth and epoxy or resin to strengthen the joint.

Have you or do you have plans to rebed those chainplates? I can't remember if you have tackled that project. This would be a good place to use butyl rubber.

You have put in a tremendous amount of effort to improve and refine Leoma. I think you are going to be very pleased when all this work is behind you. What's next in your plans?

[JD-MDR]

Thanks for the response. JS. Yes. I’m at Baja Naval boatyard and marina. Ensenada Mx. It’s about 65 mi from San Diego. This boatyard is letting me stay on the boat. I try to stay out of their way during the day. I can keep an eye on them.
I wont be putting a toe or rub rail. And don’t have enough money to finish the bulwarks. I will install the modified stanchion bases and reintaall the old temporary bulwarks that I made out of DF from HDepot. Here is my design for the stern light that will mount on the windvane tube

Yes the chainplates are all rebeded. Actually a waste because. I had already rebedded them with butyl. I had them removed and bedded again. But I thought they were glassing under them. I think my bedding work was fine. I see now that all the leaking was from the deck seam not all the hardware that I’ve bedded and rebedded over and over trying to stop the leaking
They are welding now and have started the finish painting. I haven’t decided how to make the mounts for the sidelights. I want them to be super nice and mount on the pulpit. But I will use the deck mount lights that were new last year. I can’t afford to buy anything.
Sailing plans may change. I have a Novia here. She doesn’t speak English at all but I’m getting good at Spanish. We are probably gonna get married. I made her agree to let me go sailing whenever I want. I will probably continue to live on the boat cus she is at work 16 hrs 5 days for very little pay and has three adult kids at home. One is a teacher and two are at the university. She is a navy vet and is working security on the docks. Her home is one step above a shanty maybe two but she is content. Her husband left 10 yrs ago. Im robbing the cradle being 69 yrs old and she is 51. She says that is perfect age. I agree.
I hope it’s not TMI.

. When I fix the house a little maybe I’ll live there.No hot water. No flushing toilet and the kids get the bdrms. Its just a cold concrete box. I’m ok with her staying with me two nights a week for now

[John Stone]

JD
We are all just trying to find a way through the world that works for us. No one path for all people. It seems to me the purpose of life is happiness. If your Novia is creating happiness in your life and hers too then it seems like a good thing to me. As the saying goes "Carry on Mr Bowditch."

I'm interested to see how Leoma turns out. Keep the faith.

[JD-MDR]

Painting finished. Just need to wet sand a little ridge at the tape line. I’m really glad I had them finish the bow triangle and the stern deck. They weren’t going to do that. Stanchion bases are ready just need to work on the pulpits a little. Ill install the bowsprit tomorrow.

[Jim Walsh]

Wow. Nice work and great progress so far.

[John Stone]

That looks great JD. I bet you are going to be really happy with the changes. No more leaks. Much stronger. Keep this thread going.