Does anyone know if the volvo diesel MD7A/B engine has a sacrificial zinc ? I cannot find any.
Thanks,
paul
cutt@netcom.com
zinc for volvo MD7A/B engine ???????
Moderator: Jim Walsh
Re: zinc for volvo MD7A/B engine ???????
I asked a mechanic about this at a diesel seminar. He said there isn't one. There is one in the water lift muffler.
tadmcdonald@worldnet.att.net
tadmcdonald@worldnet.att.net
Re: zinc for volvo MD7A/B engine ???????
do you know where the one in water lift muffler is ?Tad McDonald wrote: I asked a mechanic about this at a diesel seminar. He said there isn't one. There is one in the water lift muffler.
No zinc, add one
There isn't one. I added a zinc holder to the raw water inlet line to make up for it. There is also one (small) in the cooling water heat exchanger. There wasn't one in the original stainless waterlift muffler from the factory. I have since replaced that with a fiberglass waterlift.cutt wrote: Does anyone know if the volvo diesel MD7A/B engine has a sacrificial zinc ? I cannot find any.
Thanks,
paul
Re: No zinc, add one - HOW ?????
I wonder how to add a zinc holder ? Does west marine sell a zinc holder ? Where is it added ?
thanks,
paul
thanks,
paul
John wrote:There isn't one. I added a zinc holder to the raw water inlet line to make up for it. There is also one (small) in the cooling water heat exchanger. There wasn't one in the original stainless waterlift muffler from the factory. I have since replaced that with a fiberglass waterlift.cutt wrote: Does anyone know if the volvo diesel MD7A/B engine has a sacrificial zinc ? I cannot find any.
Thanks,
paul
Re: zinc for volvo MD7A/B engine ???????
In my 7B the zinc is in the inboard lower end of the water lift muffler. Not a fun job on a 28 CD.cutt wrote: do you know where the one in water lift muffler is ?
Mikie Q.
mikieq@erols.com
Sendure
You can order a zinc pencil in-line holder made by Sendure. They make them in various sizes to fit different hose ID's and NPT pipe threads. Install it in the raw water feed hose between the raw water strainer and the engine. The zinc holder has a terminal on it for connection of a ground wire. Connect the ground wire to your common ground point. See below for Sendure address and info.cutt wrote: I wonder how to add a zinc holder ? Does west marine sell a zinc holder ? Where is it added ?
thanks,
paul
SENDURE
6785 N.W. 17th Ave.
Ft. Lauderdale, Fl. 33309
PH: 954/973-1260
FAX: 954/968-7213
E-mail: sen-dure@worldnet.att.net
Web site: www.sen-dure.com