To make a long story short, after suffering the loss of both of my spreaders in a gale here on the Chesapeake, I need to find 2 replacements, plus the port mounting bracket for the mast. I've been in contact with Rig-Rite for about a month and no response yet from them. Anyone have ideas as to where to look for these parts?
Thanks
John Arsenault
CD 33 Spreaders
-
- Posts: 32
- Joined: Nov 26th, '11, 08:30
- Location: Previous owner of Cape dory 27 "Suela" Town River, Quincy, MA
Re: CD 33 Spreaders
Where are you located? Did you try a local salvage boat yard? They maybe able to help you.
Good luck!
Good luck!
-
- Posts: 32
- Joined: Nov 26th, '11, 08:30
- Location: Previous owner of Cape dory 27 "Suela" Town River, Quincy, MA
Re: CD 33 Spreaders
Sorry, I was looking on my phone earlier. Lots of CDs 33 in Chesapeake area. That's where I found my "Brass Tacks".
Again, Good luck! And I will look around here on spreaders.
-Victor
Again, Good luck! And I will look around here on spreaders.
-Victor
-
- Posts: 3
- Joined: Nov 16th, '08, 14:59
Re: CD 33 Spreaders
Thanks for the reply - I'm having a very difficult time with Rig-Rite - they should have the parts, but it has been over 6 weeks of phone calls and emails and no results to show for it.
John
John
Re: CD 33 Spreaders
Typical Rig-Rite behavior…overpriced, out-of-stock, and leaving people hanging. If the salvage yards don’t come through you may have to replace the bases and the spreaders…not necessarily original equipment as long as they are suitable. Good luck!
Jim Walsh
Ex Vice Commodore
Ex Captain-Northeast Fleet
CD31 ORION
The currency of life is not money, it's time
Ex Vice Commodore
Ex Captain-Northeast Fleet
CD31 ORION
The currency of life is not money, it's time
-
- Posts: 3
- Joined: Nov 16th, '08, 14:59
Re: CD 33 Spreaders
You are correct - I have found a local marine fabricator that will make new spreaders at a reasonable price - my guess less than Rig-Rite. I'll be taking off the one good base so the fabricator can attempt to make a new one for the Port side.
I wish Rig-Rite would get it's act together, we need good suppliers for our boats.
Thanks
John
I wish Rig-Rite would get it's act together, we need good suppliers for our boats.
Thanks
John