Mystery Tool - your guesses please

Don't forget to snap some photos while you work on that boat project, then share them here.

Moderator: Jim Walsh

Post Reply
keneasley
Posts: 177
Joined: Jul 19th, '20, 16:18
Location: 1979 Intrepid 9 Meter - Felicity

Mystery Tool - your guesses please

Post by keneasley »

I've had Felicity for four years now.
I've yet to figure out what this tool is for.
It is mounted below the alcohol stove in the galley area.
No idea what this is or what it is for.
It is about the length of a ballpoint pen.
Any guesses are appreciated.
tool_3.JPG
tool_3.JPG (1.56 MiB) Viewed 1379 times
tool_1.JPG
tool_1.JPG (2.15 MiB) Viewed 1379 times
tool_2.JPG
tool_2.JPG (1.45 MiB) Viewed 1379 times
Ken Easley
Intrepid 9 Meter - Felicity
Southport Harbor, Connecticut
Carl Thunberg
Posts: 1305
Joined: Nov 21st, '05, 08:20
Location: CD28 Cruiser "Loon" Poorhouse Cove, ME

Re: Mystery Tool - your guesses please

Post by Carl Thunberg »

Just a guess, but does the shaft end insert into a hole to keep the oven from gimbaling?
CDSOA Commodore - Member No. 725

"The more I expand the island of my knowledge, the more I expand the shoreline of my wonder"
Sir Isaac Newton
keneasley
Posts: 177
Joined: Jul 19th, '20, 16:18
Location: 1979 Intrepid 9 Meter - Felicity

Re: Mystery Tool - your guesses please

Post by keneasley »

Hello Carl,

Thanks for offering a guess. No one else has tried yet.

The stove is the original recessed countertop Kenyon pressurized alcohol stove (works great) but it is not gimballed.

Ken
Ken Easley
Intrepid 9 Meter - Felicity
Southport Harbor, Connecticut
User avatar
Frenchy
Posts: 620
Joined: Mar 14th, '15, 15:08
Location: CD 33 "Grace"

Re: Mystery Tool - your guesses please

Post by Frenchy »

Could it be an elaborate wooden match holder?
Jean - 1983 CD 33 "Grace" moored in
Padanaram Harbor
Massachusetts
Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

Re: Mystery Tool - your guesses please

Post by Jim Walsh »

I found an odd 1” teak dowel about 16” long on Orion when I bought her. One end had been turned down to 5/16” for about 1/2” so I knew it had a special purpose. Took me a couple seasons to realize it was a prop, or support, which fit neatly into a lined recess on the cabin sole and midway on the underside of the starboard settee extension berth.
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
keneasley
Posts: 177
Joined: Jul 19th, '20, 16:18
Location: 1979 Intrepid 9 Meter - Felicity

Re: Mystery Tool - your guesses please

Post by keneasley »

So far the match holder idea seems to be correct.
My cigarette lighter failed the other week and I needed to light the alcohol stove.
I recalled the match older idea and tried that with some old wooden matches I had onboard, it worked well - no burnt hands.
Ken Easley
Intrepid 9 Meter - Felicity
Southport Harbor, Connecticut
Post Reply