This is a 2-Blade, 15" wide Classic Max-Prop. True measurements are 15" wide and 8.5" long. It fits a 1" propeller shaft with standard taper. It has some pitting, but nothing that will affect performance. The gear teeth are well defined and everything fits tightly. You can find all of the information on this propeller here:
https://www.pyiinc.com/max-prop-classic.html
https://www.pyiinc.com/downloads/max-pr ... ctions.pdf
I am including 1/2 a tube of Lubriplate 130-AA. This is the recommended lubricant for this prop and you'll need to buy an additional tube to fully lubricate. It takes about 1.5 tubes total. I am also including 1/2 of a Propspeed pack. This pack is for a single propeller, but it actually has enough to cover two smaller propellers. I used it to cover my other propeller and saved 1/2 of it for future use. I think there is enough to cover this Max-Prop, but I could be wrong. Regardless, consider the lubricant and Propspeed as freebies and don't consider them in the purchase price.
NO RETURNS
BUYER PAYS SHIPPING
VIEW PHOTOS FOR ALL DETAILS ON ITEM
Also posted on ebay...https://www.ebay.com/itm/203726091426
- IMG_0109.JPG (5.68 MiB) Viewed 165 times