Non-skid update

[Jim Walsh]

Orion is in the middle of having her non-skid refreshed. After 36 years it was more “contrasting color” and less “non-skid” if you get my drift. I am using Awlgrip polyester urethane topcoat base G6004 in Moondust. There is Griptex added and a hardener to allow application with a roller and brush. It was mixed by the local pro’s and I’m following their application recommendations closely so I don’t completely foul up this project. So far I’m pleased. We have had a few unusually warm days but the dew has been quite heavy which caused the masking tape removal to be more of a challenge than I need. Some tape residue will have to be dealt with once the paint is fully cured.

[ghockaday]

We were working on the same project today. But I only get one quart of Kiwi Grip at a time. It is all my knees can stand in a day. Dennis

[John Stone]

Excellent work Jim.

If you have not used it I recommend 3M 233 tape. Not too expensive. Solvent resistant to all kinds of solvents. It’s the only tape I use unless I need something that barely sticks to the surface.

[Frenchy]

Really nice taping job, Jim. I like the light pastel color too. - Jean

[jbenagh]

Nice job, Jim!

[fmueller]

Exactly whats on my boat Jim ... Awlgrip/Moondust/Griptex ... three years ago now.

Super nice job there by you ...

You use Cetol on your teak ? Looks great as well.

cheers


Jerezana / winter slip / water tank empty / bow riding high

[Jim Walsh]

Stunning photo Fred. Yes, Cetol on all the brightwork. Refinished it in September as noted here http://www.capedory.org/board/viewtopic.php?f=9&t=37541