CD30 wet exhaust routing - looking for pics

[S/V Ethan Grey]

I am replacing the wet exhaust in my CD30 (Volvo MD7A) and was hoping someone had pictures of their wet exhaust routing. I have an aftermarket Vetus NLP45 waterlock and don't know what the original exhaust routing looked like. Thanks! -david

[Keith]

Hi David.

I'll get you some pics today or tomorrow. I believe that mine is all original.

Keith

[S/V Ethan Grey]

Thanks Keith. Here are pics of my Vetus water lock and the exhaust as it’s routed to the transom exhaust. I haven’t connected the exhaust to the water lock yet as I don’t want to cut the hose until I’m confident in the routing. When I removed the old exhaust hose, it was a straight run from the engine area bulkhead, along the underside of the cockpit seats, and then a slight bend down to the exhaust flange. I am concerned this doesn’t provide enough protection from water pushed up through the exhaust flange. Sorry the photos are sideways, I don’t know how to fix that.

[Keith]

Hi David,

Here is how mine is routed.

muffler to port lazerette.jpg (107.16 KiB) Viewed 418 times

front of lazerette.jpg (78.38 KiB) Viewed 418 times

rear of lazerette.jpg (93.82 KiB) Viewed 418 times

one more pic in next post

[Keith]

Here's the last pic

lazerette to transom.jpg (72.57 KiB) Viewed 418 times

[S/V Ethan Grey]

Keith,
Thanks a million. Those really help.
-David

[alemon]

Was just wondering the same thing about my 33. If anyone has pics of the original 33 routing i'd be equally grateful.