I currently have a fire extinguisher installed in the forward berth/head area of my Cape Dory 25D. I would like to install a second fire extinguisher in the cockpit area.
My reasoning for this is that, in my mind, there are three (3) likely places where a fire could start - engine room (diesel), stove (alcohol) or battery compartment (2 AGMs in portside cockpit locker).
If I am in the cabin and a fire starts in any of the above 3 locations I can grab the fire extinguisher in the forward berth/head. However, if I am on deck and a fire starts in the engine room or stove it may be sufficiently large that I cannot get down into the cabin to reach the forward berth/head fire extinguisher. That is why I would like to install a second fire extinguisher in the cockpit area. I can reach it from outside the cabin and spray down into the cabin (engine or stove).
I have been trying to locate a place where I can safely install a second fire extinguisher. It is a Badger Dry Chemical Model No. 5MB-6H (5 lb chemical retardant). It weights 11 lbs.
I have thought of installing it on a bracket on the underside of the portside cockpit seat hatch. I would epoxy a piece of wood to the underside of the hatch, install the fire extinguisher bracket to the wood and the fire extinguisher into the bracket. I ALWAYS have the cockpit lockers unlocked when I am aboard (I unlock the cabin hatch and both cockpit lockers first thing on boarding).
Installing on the underside of the portside cockpit seat hatch would make it readily accessible should I be in the cockpit and a fire starts in the engine compartment or stove. My only concern is the fire extinguisher's proximity to the batteries (2 AGMs).
Thoughts
![Question :?:](./images/smilies/icon_question.gif)
![Question :?:](./images/smilies/icon_question.gif)
Thanks in advance for any and all suggestions, etc.