CD 33 head removal

[Jack Jo Chamberlain]

We have to rebuild the head on our CD 33, Maggie Rose, hull #61. There appears to be no access for through bolts, so I assume the thing is held down with lag screws. Can any confirm or deny? In other words, I don't want to lose bolts and washers if they're under there somewhere. Thanks



jchamber@crosslink.net

[David Brownlee]

The head in our CD31 *is* secured by lag screws.

David Brownlee



dbrownle@sas.upenn.edu

[Bob Loewenstein]

Done that...lag screws they are. Just take one out of the old screws and you'll see what's required.

[Jack Chamberlain]

OK, lag screws they are. Thanks to all.



jchamber@crosslink.net