I just completed the repowering of my 28 foot flybridge - hull #124. Removed the Chrysler M360,
and replaced it with the Yanmar 4LH-STE (230 HP) diesel. This conversion went well and the performance
is great. Very tight fit but no major problems. If any one whould like any further details concerning
this change please Email me or leave a message on the board.
Bob Davee
builder@midcoast.com
Chrysler M360 replaced by Yanmar 230 HP Diesel
Moderator: Jim Walsh
-
John Fife
Re: Chrysler M360 replaced by Yanmar 230 HP Diesel
I also have a CD28 fly bridge (hull 101) powered with the original
Chrysler 275hp model 360 which I am planning to replace in the near
future. I would love to hear of your experiences, the options you
considered and why you choose what you did.
Also have you had any experience with a 4 bladed prop to replace the
factory installed 3 bladed one?
jdfife@villagenet.com
Chrysler 275hp model 360 which I am planning to replace in the near
future. I would love to hear of your experiences, the options you
considered and why you choose what you did.
Also have you had any experience with a 4 bladed prop to replace the
factory installed 3 bladed one?
jdfife@villagenet.com