1984 Cape Dory 30 cutter for sale

Selling or looking for a Cape Dory? Selling or looking for used gear? List your "Wanted to Buy" or "For Sale" items here.
Post Reply
tvangilder
Posts: 58
Joined: Feb 23rd, '16, 08:34
Location: CD 36 #53 "NIrvana"

1984 Cape Dory 30 cutter for sale

Post by tvangilder »

This was to be my forever cruising boat...
Until I found the same boat but a bit larger ( a Cape Dory 36). So Andantino is now available for a new owner to enjoy.

She is currently in her dock in Rock Hall, md

Andantino is a 1984 Cape Dory 30 with a cutter rig. She has been extensively upgraded, and sailed all over the Chesapeake bay, Delaware bay, and the Jersey shore.

Her sail inventory includes:
*a 4 month old Yankee (jib) with a new (this year) CDI roller furler.
* A 16 month old stays'l with 1 row of reef points with a new cover
* A 16 month old mains'l with 2 rows of reef points with a new cover
* A never set assymetric spinnaker with sock to make short handed setting easy
* A storm jib
* A storm trisail

Her galley includes:
* a recent Force 10 2 burner gimbled propane stove with new hose, regulator, and aluminum propane tank.
* a large top loading icebox
* generous galley storage
* pressure water and foot pump at sink

Electronics include:
* 3 year old garmin chartplotter
* a newly installed depth sounder with bronze through hull transducer
* an older wind strength/ direction gauge (not installed)
* Navico tp5000 autopilot with bronze tiller adapter
* Birdell Blipper mast mounted radar reflector

Engine:
* 17 hp Volvo Penta MD7B. freshwater cooled since new.
* bronze single lever control
* additional access created to make engine maintenance easier.
* new engine panel, tachometer, oil pressure gauge, temp gauge (to replace the original idiot lights), and new temp and oil pressure senders on the engine.

ground tackle:
* 25 pound Bruce type anchor with 70 feet of chain and 150 feet of 1/2 inch nylon.
* 25 pound CQR spare

running lights:
* new LED running lights
* LED masthead tricolor
* LED anchor light
* emergency strobe at mast head
* LED spreader lights
* new steaming light

8 opening bronze portlights, midship hatch and foredeck hatch, dorade vent, and bronze cowl vents aft.
Asking $9,999, but will entertain any reasonable offer.

I would be particularly flexible on price for someone looking specifically for a Cape Dory 30.

email me at sailorguy26f2@ hot mail. com (without any of the spaces) for pictures and to arrange a viewing
Attachments
companionway ladder.jpg
companionway ladder.jpg (295.08 KiB) Viewed 695 times
companionway looking forward.jpg
companionway looking forward.jpg (76.17 KiB) Viewed 695 times
Thad Van Gilder
CD36 #53 "NIrvana"
Home Port: Rock Hall, Md
tvangilder
Posts: 58
Joined: Feb 23rd, '16, 08:34
Location: CD 36 #53 "NIrvana"

Re: 1984 Cape Dory 30 cutter for sale

Post by tvangilder »

The Volvo MD7B
Attachments
volvo penta md7B.jpg
volvo penta md7B.jpg (467.18 KiB) Viewed 689 times
Thad Van Gilder
CD36 #53 "NIrvana"
Home Port: Rock Hall, Md
tvangilder
Posts: 58
Joined: Feb 23rd, '16, 08:34
Location: CD 36 #53 "NIrvana"

Re: 1984 Cape Dory 30 cutter for sale

Post by tvangilder »

Stove
Attachments
stove.jpg
stove.jpg (682.94 KiB) Viewed 689 times
Thad Van Gilder
CD36 #53 "NIrvana"
Home Port: Rock Hall, Md
tvangilder
Posts: 58
Joined: Feb 23rd, '16, 08:34
Location: CD 36 #53 "NIrvana"

Re: 1984 Cape Dory 30 cutter for sale

Post by tvangilder »

In her dock
Attachments
Andantino transom.jpg
Andantino transom.jpg (941.25 KiB) Viewed 689 times
Thad Van Gilder
CD36 #53 "NIrvana"
Home Port: Rock Hall, Md
User avatar
S/V Ethan Grey
Posts: 166
Joined: Apr 19th, '19, 06:52
Location: S/V Ethan Grey - CD 30C

Re: 1984 Cape Dory 30 cutter for sale

Post by S/V Ethan Grey »

I really like your dorade vent, and aft bronze cowl vents. I plan on doing something similar whenever i can find some at a decent price. Good luck with the sale. Fresh water cooled MD7B is pretty nice to have.
David
S/V Ethan Grey
1981 CD 30C, Hull #199
Niceville, FL
CDSOA# 1947
Post Reply