On my 1985 CD 22D there are two (2) factory installed transducers
thru-hull and located under the rear port berth. The forward trans-
ducer is for a depthfinder and the aft is a knotmeter transducer.
Neither have ever been attached to instruments. The wiring is in
excellent condition but no indentification as to numbers, etc. One
has a round three (3) female connector and the other has a seven pin
round female connector. In the same wiring bundle is a fused two (2)
pin connector. Any help would be appreciated.
wtclark@datasync.com
Need help to identify transducers on CD 22D
Moderator: Jim Walsh