CD 25 Parts, Parts and More Parts

[tidalbay]

I have a 1979 Cape Dory 25 that sustained damage to the hull while she was on the hard. The cost to repair is more than I am able to spend - so I have reluctantly decided instead to part the boat out. The boat is complete - so I pretty much have everything.

- bow pulpit
- stern rail
- fold up ladder
- lifelines
- stanchions and bases
- all hatches and covers
- bronze cleats
- bronze cockpit drains
- original 2 burner Seaward stove (converted from CNG to LP)
- electrical panel
- manual bilge pump
- teak pieces
- complete rig (mast, boom, standing and running rigging, boom vang, main sheet, etc.)
- interior bulkhead walls and panels
- settee cushions
- teak settee table with post and base
- BRAND New Sunbrella Mainsail Cover / Tiller cover / Winch Covers ( all NAVY in color ) never even been installed
- original bronze winches and stands
- bronze cleats at coamings for jib sheets
- tiller and hardware
- rudder and rudder post - needs repair (typical CD25 problem)
- (3) sails - main, 110 and 130 - all in fair condition
- interior lights
- exterior lights

If interested in anything - make me an offer. I can send email with photos. All items are located in St. Petersburg, FL.

[Russell]

Private message sent

[Steve Bryant]

I sent you a PM also.

Thanks,

[Walker Brown]

I have a CD 27 built in '78
My cockpit electric panel, which contains idiot lights and the ignition switch is cracked and needs replacement. If necessary I can send you a photo. Please advise if this part is available for sale.
Walker Brown
Philadelphia

[steveg]

Are the stanchions straight? How much for them? Do you have a stopper for the ice box, you know the thingy that stops the water from draining into the bilge? How much for the rudder and post, as well as the tiller? I may be interested in other parts as well.

Steve

[broad reacharound]

I'm ready to buy sails? I've pm'd and posted but am new here. Anyone heard back from tidalbay? How do I reach him or her?

[tidalbay]

Sorry for any delays. I have responded to some. I have been very busy over the past couple days dealing with the disposal of the hull - and I had a prior engagement this past weekend that kept me busy all weekend. Kind of been a little overwhelmed.

I will get a response out to all within the next day. Trying to get some pictures taken to email out to all.

I will respond to everybody that sent a PM with my phone # also so you can call me.

Thanks,

Jon

[tidalbay]

I posted a bunch of pictures on Photobucket.

Will keep posting more and more as I get them - should have most pics up by Thursday or Friday.

http://photobucket.com/tidalbayrestorations

[JAB]

Tidal Bay,

I could use that lazerette latch. One of mine is broken. Is it still available? How much do you want for it.

Thanks,

John

[ceilidh]

Tidalbay... I'm interested in the two jib sheet cleats and drop boards for the companionway... can you quote me a price if still available?? thanks Hank

pm sent as well...

[heisemann]

E-mail sent regarding interest in various parts

Thank you

[kerlandsen]

I would love one of the winch stands.

PM sent.

Kyle

[tidalbay]

Thanks to all so far who have purchased some parts. Some stuff has already been sent out and still finalizing the details on some others.

As of right now - here is an UPDATED list of what is still available:

- (2) 6" bronze cleats
- (1) 8" bronze cleat
- rear lazarette cover
- cockpit lazarette covers
- fixed cover at companionway
- sliding hatch at companionway
- (2) 3/4" genoa slide track
- Main sheet w/ 3/4" slide track
- electrical panel - original panel but with new push button breakers and toggle switches
- interior reading lights
- interior dome lights
- solid teak floor board/cover
- v berth water tank
- bronze stemhead fitting
- bow rail
- stern rail
- chain plates
- (2) 3/4" bronze thru hulls
- (2) 1-1/2" bronze thru hulls
- (1) 3/4" marelon seacock
- (1) 3/4" bronze ball valve
- (2) 1-1/2" bronze ball valve
- (3) stanchion bases
- windows
- Mast and boom complete w/ running and standing rigging
- NEW Sunbrella Navy Mainsail Cover
- battery switch
- bronze tiller strap/hardware (tiller and extension are sold)
- manual bilge pump
- (2) perko decks vents
- propane 2 burner stove
- custom built outboard bracket (for the well) with 1/4" stainless steel plates and a composite garelick mounting block (not wood)
- solid teak step that mounts in front of the ice box

- I STILL HAVE THE TRAILER ALSO - ASKING $3500 OBO. THIS IS A REALLY GOOD TRAILER AND WOULD PROBABLY HOLD UP TO A CD28.

I also have some of the interior teak plywood panels and I have all the plywood settee/vberth bottoms.

I think this is pretty much everything.

I am accepting payments via paypal or a personal check.

Please be patient with me - I am working diligently to accomodate all requests as quickly as possible.

Thanks,

Jon

[J Stanley]

I'm almost done with my 25 and looking for a bow pulpit, rigging, life lines and assort parts. If you still have any of these, let me know and I'll drive over from Vero Beach to pick them up. You can reach me at 772-473-0645 or by email. Thanks! Jim

[tartansailor]

Need 2
Please PM availability.
Thanks in advance,

Dick