Hi folks,
I use a Johnson 8hp with a 25" shaft. Anybody out there using a 20" shaft motor? Is it sufficient to keep the propeller submerged under power in chop and swells?
thanks,
Erik
cd 25 motor survey-what do you use?
Moderator: Jim Walsh
cd 25 motor survey-what do you use?
best,
Erik Schlein
Erik Schlein
-
Carl Thunberg
- Posts: 1302
- Joined: Nov 21st, '05, 08:20
- Location: CD28 Cruiser "Loon" Poorhouse Cove, ME
Check the archives
Erik,
Search the archives on this. The topic of outboard engines on CD25s has been discussed at length many times. Click on the Search icon above and type in "CD25 Outboard" and you'll find a wealth of information on this topic. If you have any additional questions after reviewing what you find, don't hesitate to ask. Good luck and happy searching!
Search the archives on this. The topic of outboard engines on CD25s has been discussed at length many times. Click on the Search icon above and type in "CD25 Outboard" and you'll find a wealth of information on this topic. If you have any additional questions after reviewing what you find, don't hesitate to ask. Good luck and happy searching!
CDSOA Commodore - Member No. 725
"The more I expand the island of my knowledge, the more I expand the shoreline of my wonder"
Sir Isaac Newton
"The more I expand the island of my knowledge, the more I expand the shoreline of my wonder"
Sir Isaac Newton
just searched the archive...call off the dogs
Thanks Carl. Plenty of good info already in the archive!
cheers-Erik
cheers-Erik
best,
Erik Schlein
Erik Schlein