Is it difficult to remove the portlights on a Typhoon? I see the screw heads on the outside, but I am concerned about what they thread into on the inside.
fcgetz@juno.com
Typhoon Portlights
Moderator: Jim Walsh
-
john
Re: Typhoon Portlights
Frank:Frank wrote: Is it difficult to remove the portlights on a Typhoon? I see the screw heads on the outside, but I am concerned about what they thread into on the inside.
The screws should just go into the fiberglass and the ports are probably bedded in some sealant. Remove the screws and then with a thin bladed tool work the ports out. It shouldn't be tough.
John
NOSPAMbranchedoakmarin@aol.com
-
sloopjohnl
Re: Typhoon Portlights
be careful - the original portlights are only plastic. spring for some nice new bronze portlights with real glass for a great upgrade.
Frank wrote: Is it difficult to remove the portlights on a Typhoon? I see the screw heads on the outside, but I am concerned about what they thread into on the inside.