pilot lights

[Tom Blanchard]

Anybody know a source of replacements for the 12v and 120v pilot lights on the CD 36 electrical panels? They use a 1/2" mounting hole.



tblanchard@empire.state.ny.us

[Bill]

Tom

I just replaced the 12v on my 25D with a radio shack light and it fits/works perfectly. Not too sure about the 120v.

Hope this helps

FW
Bill

Anybody know a source of replacements for the 12v and 120v pilot lights on the CD 36 electrical panels? They use a 1/2" mounting hole.

cd25d@rhapsodysails.com

[Bob Loewenstein]

I, too, replaced my 12 volt using a small incandescent from Radio Shack. Check the amperage of the bulb you decide on; I noticed a variety of values in the small lamps. I think the one I use is about 60 mA.

[John R.]

Anybody know a source of replacements for the 12v and 120v pilot lights on the CD 36 electrical panels? They use a 1/2" mounting hole.

Any good electronics source, check your local yellow pages. Radio Shack lamps are low quality, they don't last long, the socket leads and /or terminals are weak and wire leads seem cheap quality. Better off with commercial industrial quality lamps and sockets. If you don't have a good electronics parts source near you try Newark. They are a national company and yes you can purchase from them.

Here's a link to their website and you might consider requesting a current catalog from them.

The AC lamp in a CD is a neon lamp.