spreaders for CD25D

[chuck gombeski]

Spreaders lost in winter storage.
RigRite can supply but only in 30inch length.
What is the correct dimension for the tube?



Cgombeski@aol.com

[Dan H]

Spreaders lost in winter storage.
RigRite can supply but only in 30inch length.
What is the correct dimension for the tube?

I just bought a mast plate pin from Rig Rite. If you use their website to find the part, there shouldn't be any question as to the size. It can be a little difficult to follow their pages to the specific part, but it you stick with it you should end up with the right equipment. Start with the spar size and dig in through that thread. If all else fails, ask for help via e-mail. In my experience they are not terribly helpful on the phone if you do not have an exact part number from their website.

Dan Hanlon
SHWEEGO
CD25 #652



djhhan@aol.com

[Peter Wallace]

Spreaders lost in winter storage.
RigRite can supply but only in 30inch length.
What is the correct dimension for the tube?

Chuck,
I have CD25D #120. The spreader tubes measure 30" w/o the tips.
OD is 1 5/16", wall thickness is 1/8". There is a 1/8 " hole 1 1/4" from mast end to secure tube to spreader brackets.
Good luck, Peter



pjwallace@mediaone.net