Zinc for Cape Dory 25D that has previously been in fresh water
Moderator: Jim Walsh
Zinc for Cape Dory 25D that has previously been in fresh water
I purchased a Cape Dory 25D a couple of months ago, and will be splashing it in the Spring, in salt water, possibly for the first time. Should I put a zinc on the propeller shaft? Not a ton of room there
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3621
- Joined: Oct 6th, '08, 07:30
- Location: S/V Far Reach: CD 36 #61 www.farreachvoayges.net www.farreachvoyages.com
Re: Zinc for Cape Dory 25D that has previously been in fresh water
Yes. Absolutely must put a zinc on that shaft. Looks like enough room from the photo. There are lots of different styles. Looks like the style I use might fit.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3621
- Joined: Oct 6th, '08, 07:30
- Location: S/V Far Reach: CD 36 #61 www.farreachvoayges.net www.farreachvoyages.com
Re: Zinc for Cape Dory 25D that has previously been in fresh water
You want to clean that shaft up before you install the zinc. I use 1200 wet dry sand paper then install the zinc. Make sure you apply Tef-Gel or other anti seize coating to the threads of the bolts that tighten the zinc.
You do not have the required permissions to view the files attached to this post.
Re: Zinc for Cape Dory 25D that has previously been in fresh water
Collar zinc. West Marine has 'em.