Looking for a 3/4" adjustable track stop

[Adelante]

Hi fellow cape dorians!

I've seen this pass by in the forum and hope someone has a spare for sale! (or know someone who does)
I'm looking for the 3/4 inch (19mm) track stopper - see attachment- or a proven alternative for a Cape Dory 30 Cutter.

Unfortunately I bought the boat with a broken stopper, now its held in place with a simple bolt but that won't last.

all the best,

Frederik
Adelante - a CD30 C in Amsterdam

[mgphl52]

I would contact Garhauer Marine directly. They may be able make one for you.
https://www.garhauermarine.com

[wikakaru]

You could always try one of these: https://hardware.schaefermarine.com/ind ... ts_id=3973
If you don't need the built-in pad-eye, just chop it off and use the stop alone. It will be way cheaper than a custom fabrication.

Smooth sailing,

Jim

[Adelante]

thanks gents - I looked into re-fabricating the left-most stopper by attaching an index plunger... no luck finding a fitting piece.
But I might just buy the 1-piece Schaefer adjustable stop https://hardware.schaefermarine.com/ind ... s78vmhchs2

But would have loved to put another original piece on it