Raising/Lowering the mast using an A-Frame
Moderator: Jim Walsh
-
Peter Young
- Posts: 19
- Joined: Jun 5th, '18, 19:31
- Location: Typhoon Weekender, Indefatigable, Burlington VT (Hull #203)
Re: Raising/Lowering the mast using an A-Frame
Well done and very clear - excellent solution.
-
Typhoon4Fun
- Posts: 87
- Joined: Apr 29th, '18, 09:34
- Location: TySr - Adeline
Re: Raising/Lowering the mast using an A-Frame
Many thanks, Jim, for sharing the details of your system! I modified my own approach to adopt your a-frame.
Since I do it in the water, I feel better rigging some temporary stays, which you can make out in the photos if you squint.
For a few years now I have been using a gin pole:
But this year I made an a-frame as you specified. What I love is that I am able to set the roller furler in the a-frame. It was always much more awkward before.
That looks better! Always a big weight off the shoulders.
Since I do it in the water, I feel better rigging some temporary stays, which you can make out in the photos if you squint.
For a few years now I have been using a gin pole:
But this year I made an a-frame as you specified. What I love is that I am able to set the roller furler in the a-frame. It was always much more awkward before.
That looks better! Always a big weight off the shoulders.
-
wikakaru
- Posts: 839
- Joined: Jan 13th, '18, 16:19
- Location: 1980 Typhoon #1697 "Dory"; 1981 CD22 #41 "Arietta"
Re: Raising/Lowering the mast using an A-Frame
Nice modification to extend the A-frame above the pivot a little to accommodate the roller furling. I guess that makes it an X-frame, strictly speaking?