Bomar hatch gasket replacement

Don't forget to snap some photos while you work on that boat project, then share them here.

Moderator: Jim Walsh

Post Reply
User avatar
S/V Ethan Grey
Posts: 166
Joined: Apr 19th, '19, 06:52
Location: S/V Ethan Grey - CD 30C

Bomar hatch gasket replacement

Post by S/V Ethan Grey »

Thoughts on replacing the Bomar hatch gaskets on my CD30. I found 3 different one's that I'm considering. They are all 9/16" EPDM cord. OEM is part #P100-52. I need 13 ft +/- some for mistakes.

Downwind Marine: 15ft x $5.72 = $85.80
https://www.downwindmarine.com/Bomar-Ha ... 91550.html

Hatch Masters: 15ft x $4.35 = $65.25
https://hatchmasters.com/product/9-16-d ... atch-seal/

Canal Rubber: 25ft = $28.75
https://www.canalrubber.com/general-ful ... onge-cord/

Anyone find a good, less expensive replacement for the Bomar gasket?
David
S/V Ethan Grey
1981 CD 30C, Hull #199
Niceville, FL
CDSOA# 1947
User avatar
Steve Laume
Posts: 4127
Joined: Feb 13th, '05, 20:40
Location: Raven1984 Cape Dory 30C Hull #309Noank, CT
Contact:

Re: Bomar hatch gasket replacement

Post by Steve Laume »

Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

Re: Bomar hatch gasket replacement

Post by Jim Walsh »

The Bomar product with the “peel and stick” adhesive feature is a great product and makes the job a breeze.
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
Post Reply