Ocean Engineering

[Stephen Heineke]

I am looking for a stern pulpit rail for my CD25. The "Where to Look" page on this site list Ocean Engineering as a supplier of rails for CDs. I sent them an e-mail requesting information but got no response. I then called the phone number listed and it appears to be out of sevice. Does anyone know the status of Ocean Engineering?
Thanks for any info you might have.
By the way...this is a great sailing community on this site. I'm new to sailing and have found the information on this site to be invaluable.

Stephen Heineke
CD25 #67
s/v La Suavita



austex@attglobal.net

[Mike Buppert]

I sent them an e-mail about 9 months ago about the same thing, a pushpit for our CD25. They responded very promply with a quote. If I remember it was around $325. I did not order it yet as I have not decided if I want to add the rail and lifelines .

Mike Buppert

I am looking for a stern pulpit rail for my CD25. The "Where to Look" page on this site list Ocean Engineering as a supplier of rails for CDs. I sent them an e-mail requesting information but got no response. I then called the phone number listed and it appears to be out of sevice. Does anyone know the status of Ocean Engineering?
Thanks for any info you might have.
By the way...this is a great sailing community on this site. I'm new to sailing and have found the information on this site to be invaluable.

Stephen Heineke
CD25 #67
s/v La Suavita

buppert@csionline.net

[Stephen Heineke]

Thanks for the info Mike. I'll try them again. Maybe my e-mail drifted into cyber-space. From the prices I have been quoted, $325 sounds reasonable.

I sent them an e-mail about 9 months ago about the same thing, a pushpit for our CD25. They responded very promply with a quote. If I remember it was around $325. I did not order it yet as I have not decided if I want to add the rail and lifelines .

Mike Buppert

I am looking for a stern pulpit rail for my CD25. The "Where to Look" page on this site list Ocean Engineering as a supplier of rails for CDs. I sent them an e-mail requesting information but got no response. I then called the phone number listed and it appears to be out of sevice. Does anyone know the status of Ocean Engineering?
Thanks for any info you might have.
By the way...this is a great sailing community on this site. I'm new to sailing and have found the information on this site to be invaluable.

Stephen Heineke
CD25 #67
s/v La Suavita

austex@attglobal.net

[Dan H]

Thanks for the info Mike. I'll try them again. Maybe my e-mail drifted into cyber-space. From the prices I have been quoted, $325 sounds reasonable.

I sent them an e-mail about 9 months ago about the same thing, a pushpit for our CD25. They responded very promply with a quote. If I remember it was around $325. I did not order it yet as I have not decided if I want to add the rail and lifelines .

Mike Buppert

I am looking for a stern pulpit rail for my CD25. The "Where to Look" page on this site list Ocean Engineering as a supplier of rails for CDs. I sent them an e-mail requesting information but got no response. I then called the phone number listed and it appears to be out of sevice. Does anyone know the status of Ocean Engineering?
Thanks for any info you might have.
By the way...this is a great sailing community on this site. I'm new to sailing and have found the information on this site to be invaluable.

Stephen Heineke
CD25 #67
s/v La Suavita

I just checked out their website, boatrails.com, it is working fine.



djhhan@aol.com

[Catherine Monaghan]

Steve,

When did you call or e-mail Ocean Engineering? If it was today, 2/6, much of the northeast, particularly areas in PA and CT are still without power and phone service due to the heavy wet snow which brought down utility lines. Try again tomorrow.

catherine_monaghan@merck.com
CD32 <http://www.hometown.aol.com/bcomet/real ... ization</a>, #3
Rahway, NJ
Raritan Bay

I am looking for a stern pulpit rail for my CD25. The "Where to Look" page on this site list Ocean Engineering as a supplier of rails for CDs. I sent them an e-mail requesting information but got no response. I then called the phone number listed and it appears to be out of sevice. Does anyone know the status of Ocean Engineering?
Thanks for any info you might have.
By the way...this is a great sailing community on this site. I'm new to sailing and have found the information on this site to be invaluable.

Stephen Heineke
CD25 #67
s/v La Suavita

catherine_monaghan@merck.com

[Jerry Granzen]

I ordered a stern rail and stanchions from Ocean Engineering for my CD25 last September, 2000 and was told it would take 4 to 6 weeks. As of 2/8/01 I have not received the order, nor have they been returning any of my recent phone calls. The order was initially delayed because their welder suffered an injury. As of January, I was told the order was just a week from being completed. No word since. I have begun to consider cancelling the order. Currently, I'm searching for a local (Long Island, NY) fabricator. Ocean Engineering's parent company is the Bellmore-Johnson Co., you can try reach them at 800-575-2171, however, based upon my experience so far, I find it difficult to recommend them.

I am looking for a stern pulpit rail for my CD25. The "Where to Look" page on this site list Ocean Engineering as a supplier of rails for CDs. I sent them an e-mail requesting information but got no response. I then called the phone number listed and it appears to be out of sevice. Does anyone know the status of Ocean Engineering?
Thanks for any info you might have.
By the way...this is a great sailing community on this site. I'm new to sailing and have found the information on this site to be invaluable.

Stephen Heineke
CD25 #67
s/v La Suavita

[Jerry Granzen]

Ocean Engineering recently contacted me. They have had a significant production backlog. They hope to complete my order very soon.

I ordered a stern rail and stanchions from Ocean Engineering for my CD25 last September, 2000 and was told it would take 4 to 6 weeks. As of 2/8/01 I have not received the order, nor have they been returning any of my recent phone calls. The order was initially delayed because their welder suffered an injury. As of January, I was told the order was just a week from being completed. No word since. I have begun to consider cancelling the order. Currently, I'm searching for a local (Long Island, NY) fabricator. Ocean Engineering's parent company is the Bellmore-Johnson Co., you can try reach them at 800-575-2171, however, based upon my experience so far, I find it difficult to recommend them.

I am looking for a stern pulpit rail for my CD25. The "Where to Look" page on this site list Ocean Engineering as a supplier of rails for CDs. I sent them an e-mail requesting information but got no response. I then called the phone number listed and it appears to be out of sevice. Does anyone know the status of Ocean Engineering?
Thanks for any info you might have.
By the way...this is a great sailing community on this site. I'm new to sailing and have found the information on this site to be invaluable.

Stephen Heineke
CD25 #67
s/v La Suavita