CD30 For Sale- Portland, Maine

[Maine_Buzzard]

Now on the market, ready to be sailed away. $19,000 (new price 7/10)

1981 CD30 Hull Number 193

Cutter rigged, now set up as a sloop. Tiller model.

Beta 14 diesel, 900 hours.

Full suit of sails, Asymmetrical and Racing Spinnakers, , 165% Drifter, 150% Genoa, ATN Gale Sail, Yankee, Staysail, unused Storm Trysail.

Harken 2:1 Traveller on Garhauer risers.

All parts to return to cutter config, and many others.

Annual Cetol on exterior teak, interior is oiled occasionally.

Origo alcohol stove on a gimbal.

VHF with remote mike in cockpit and Garmin 182C GPS linked. Tiller Autopilot.

More details and photos at http://www.capedory30forsale.com

Will be taking her to Rockland next week. Contact me via phone to inspect.
207-239-8655

Cheers!

[nhammatt]

To anyone in the market for a CD30 (or any CD in this range) I would highly recommend taking a look at Guppy. My family and I managed to go aboard this past weekend and It was apparent she is very well cared for. The few modifications (sail cabinet, etc.) were tastefully crafted and made the boat better.
If you can't make it to Maine, take a peek at Guppy's website, it's exceptionally thorough.

[Maine_Buzzard]

Guppy is now on the hard in Rockland, drop me a line for an inspection.

[Maine_Buzzard]

Bump- Md Buyer came close, but found one locally. Still available!

[Maine_Buzzard]

Bump- Getting ready to pull the cover!

[Maine_Buzzard]

Guppy is now in Camden, with price lowered to $19.000.

Brand new main sail from Bohndell Sailmakers, will post photos soon.

I will be at the Woodenboat School July 16-30 and MDI afterwards. Come down for a sail!

[Maine_Buzzard]

Back from Brooklin and SW Harbor. Plenty of sailing, motored 8 hrs to return yesterday, the only time a screwdriver was needed- a cabin light was a bit wonky in the socket...

Now in Camden Harbor till September.