Recently, I purchased hull #1894, in Va.
The standing rigging is very loose, and I want to install a compression post before making it taut.
Any help with pics and ideas on best materials to use, etc., would be greatly appreciated.
Pete W.
"Sea Wind"
Compression Post - Typhoon Weekender
Moderator: Jim Walsh
-
Skeep
- Posts: 617
- Joined: Feb 23rd, '13, 08:16
- Location: Previously CD Typhoon #729, now Alberg 30 Hull #614
- Contact:
Re: Compression Post - Typhoon Weekender
Hey Pete,
There's a good bit of stuff already on the site if you use the search feature. Just open any topic, scroll down to the bottom left and you'll see the search box.
Enjoy
There's a good bit of stuff already on the site if you use the search feature. Just open any topic, scroll down to the bottom left and you'll see the search box.
Enjoy
Skeep
Supporting Member #1576 of the CDSOA
Current Vessel, Alberg 30 Hull #614 to be named yet
Formerly S/V Hull #729 "Baggy Wrinkles"
Blogsite for Alberg Ty and Alberg 30 continues athttp://baggywrinkles.blogspot.com
Located at Lake Murray Sailing Club, Chapin South Carolina
Supporting Member #1576 of the CDSOA
Current Vessel, Alberg 30 Hull #614 to be named yet
Formerly S/V Hull #729 "Baggy Wrinkles"
Blogsite for Alberg Ty and Alberg 30 continues athttp://baggywrinkles.blogspot.com
Located at Lake Murray Sailing Club, Chapin South Carolina