The other day a friend took me out on her Hereshoff 12.5. The furled mainsail was held in place by a neat bungee cord net--one long line with four or so short cords that came off it.
She doesn't know what it is called or who made it because it came with the boat. Does anyone know who makes it, and what the proper name is? I'd love to get one for my Typhoon's mainsail.
Thanks,
Tom Ricks
Deer Isle, Me.
A bungee net for holding a furled mainsail
Moderator: Jim Walsh
Re: A bungee net for holding a furled mainsail
Jim Walsh
Ex Vice Commodore
Ex Captain-Northeast Fleet
CD31 ORION
The currency of life is not money, it's time
Ex Vice Commodore
Ex Captain-Northeast Fleet
CD31 ORION
The currency of life is not money, it's time
-
- Posts: 185
- Joined: Jan 10th, '06, 18:10
- Location: CD31, 1985, #85, CARINA
Re: A bungee net for holding a furled mainsail
We call ours a centipede. I came up with our design many decades ago. And, have used it on many different boats. It is easy, and inexpensive to make your own.
You need: 2 clips, either plastic or metal; a length of light line that will reach form the boom end to the goose-neck; about 30' of one inch polypropylene webbing; sail needle & whipping twine.
Attach the 2 clips to the ends of the line. This line will hook to the ends the boom, and under the boom. Make about 5 sail-ties, each of them, the maximum length for your furled mainsail. Sew the sail-ties to the centipede line at equal distant intervals. The centipede should have no front or back if all of the sail-ties are the same length.
I have used shock-cord and hooks before, but I think the polypropylene webbing works better.
Just before dropping the main-sail, attach the centipede under the boom. Lower and furl the main-sail and tie off the sail-ties.
It works perfectly and no chance to lose a sail-tie. Good Luck. JM
You need: 2 clips, either plastic or metal; a length of light line that will reach form the boom end to the goose-neck; about 30' of one inch polypropylene webbing; sail needle & whipping twine.
Attach the 2 clips to the ends of the line. This line will hook to the ends the boom, and under the boom. Make about 5 sail-ties, each of them, the maximum length for your furled mainsail. Sew the sail-ties to the centipede line at equal distant intervals. The centipede should have no front or back if all of the sail-ties are the same length.
I have used shock-cord and hooks before, but I think the polypropylene webbing works better.
Just before dropping the main-sail, attach the centipede under the boom. Lower and furl the main-sail and tie off the sail-ties.
It works perfectly and no chance to lose a sail-tie. Good Luck. JM
John & Nancy Martin
Sailing on Lake Lanier just NE of Atlanta
CD31 #85 "Carina" 1985
Sailing on Lake Lanier just NE of Atlanta
CD31 #85 "Carina" 1985
Re: A bungee net for holding a furled mainsail
Hi Tom, I have the Sailcare Sailjockey on my Typhoon and it is a nice addition to help manage your mainsail. It is a reasonable price also but if I bought another sailboat, I would make my own with little effort. There are other items on ebay that function the same but the Sailjockey is stowed under the boom without any dangling cords.
Checkout these two solutions on ebay:
http://www.ebay.com/itm/SAIL-TIE-SEGELE ... 67&vxp=mtr
http://www.ebay.com/itm/SAIL-TIE-Boom-s ... ad&vxp=mtr
Regards, Ron
Checkout these two solutions on ebay:
http://www.ebay.com/itm/SAIL-TIE-SEGELE ... 67&vxp=mtr
http://www.ebay.com/itm/SAIL-TIE-Boom-s ... ad&vxp=mtr
Regards, Ron
Ron Kallenberg
Old Orchard Beach, Maine
Sailing in Saco Bay, Maine
Old Orchard Beach, Maine
Sailing in Saco Bay, Maine
- Joe Myerson
- Posts: 2216
- Joined: Feb 6th, '05, 11:22
- Location: s/v Creme Brulee, CD 25D, Hull #80, Squeteague Harbor, MA
Re: A bungee net for holding a furled mainsail
Hi Tom,
My 25D came with a "centipede" that the PO had made. It was shot, and I bought another one, pre-made, at West Marine. It worked well enough for a few seasons, but when the UV got to it, I ordered the Sail Jockey from SailCare. It's cheap, effective, and you don't have to remove it when you're sailing.
BTW, I have no financial interest in SailCare, although I do like their prices and customer-friendly service.
Best,
--Joe
P.S. I love the 12 1/2. We've got an active fleet of them here on Buzzards Bay. Most are now glass versions.
My 25D came with a "centipede" that the PO had made. It was shot, and I bought another one, pre-made, at West Marine. It worked well enough for a few seasons, but when the UV got to it, I ordered the Sail Jockey from SailCare. It's cheap, effective, and you don't have to remove it when you're sailing.
BTW, I have no financial interest in SailCare, although I do like their prices and customer-friendly service.
Best,
--Joe
P.S. I love the 12 1/2. We've got an active fleet of them here on Buzzards Bay. Most are now glass versions.
Former Commodore, CDSOA
Former Captain, Northeast Fleet
S/V Crème Brûlée, CD 25D, Hull # 80
"What a greate matter it is to saile a shyppe or goe to sea."
--Capt. John Smith, 1627
Former Captain, Northeast Fleet
S/V Crème Brûlée, CD 25D, Hull # 80
"What a greate matter it is to saile a shyppe or goe to sea."
--Capt. John Smith, 1627