This bulletin board, hosted by the CDSOA, Inc., is the on-line meeting place for all Cape Dory owners and groups. We welcome everyone's questions, answers and comments about Cape Dory sailboat
OK so now the taff-rail has emerged from production:
The craftsman who remanufactured the item did not require any steaming to build or to fit. He did realign the seam on the deck surface side as can be seen here:
Next will be Epiphanes Varnish while on a bit of family visit in Florida and then an installation on the vessel upon return. Will update that finished photo.
Skeep
Supporting Member #1576 of the CDSOA
Current Vessel, Alberg 30 Hull #614 to be named yet
Formerly S/V Hull #729 "Baggy Wrinkles"
Blogsite for Alberg Ty and Alberg 30 continues athttp://baggywrinkles.blogspot.com
Located at Lake Murray Sailing Club, Chapin South Carolina
I forgot to get back to this in a timely manner, but am posting a view of the Taff-Rail completion installed, I had talked about. I did add all the pics to my blogsite (http://baggywrinkles.blogspot.com/) but not everybody looks at blogs, LOL, so here are the results of the remanufactured Taff Rail:
Here is a closeup from the starboard quarter:
Skeep
Supporting Member #1576 of the CDSOA
Current Vessel, Alberg 30 Hull #614 to be named yet
Formerly S/V Hull #729 "Baggy Wrinkles"
Blogsite for Alberg Ty and Alberg 30 continues athttp://baggywrinkles.blogspot.com
Located at Lake Murray Sailing Club, Chapin South Carolina
He is a furniture maker located near Sumter, South Carolina, whose attention to detail was brilliant.
Skeep
Supporting Member #1576 of the CDSOA
Current Vessel, Alberg 30 Hull #614 to be named yet
Formerly S/V Hull #729 "Baggy Wrinkles"
Blogsite for Alberg Ty and Alberg 30 continues athttp://baggywrinkles.blogspot.com
Located at Lake Murray Sailing Club, Chapin South Carolina
Skeep wrote:Karl, not that, but that is a great source. I'm referring to this tacky bit of stuff on my vessel:
I'm fairly certain that's factory applied garnish/trim to cover the taffrail-to-hull seam. My '76 TyWE has the same piece. I think a lot of them went missing as they seem prone to snagging lines at the outer edges. I've spent some time cleaning and polishing the one from my boat with good results. Still, I think I may omit it in the final assembly as I think it's a cleaner look without it.
Nice job on your boat, BTW!
Edit:
I remembered this picture in the Cape Dory brochure published in 1977. You can see the trim piece on the stern in this photo. I think the trim allowed them to apply the taffrail without spending a lot of time fairing the joint.
Taffrail Trim.jpg (130.4 KiB) Viewed 480 times
Bill Simmeth - Delaplane, VA
TyWe 1176 "Whisper" - Fishing Bay, VA
Thanks for the photos and comments. After consideration, I re-put my trim piece on the advice of another who said, "you know, if it does come in contact, at least the trim will take the beating." Although it does look a bit ratty, I put it back on the stern and for the time being am ignoring how ugly it is.
Skeep
Supporting Member #1576 of the CDSOA
Current Vessel, Alberg 30 Hull #614 to be named yet
Formerly S/V Hull #729 "Baggy Wrinkles"
Blogsite for Alberg Ty and Alberg 30 continues athttp://baggywrinkles.blogspot.com
Located at Lake Murray Sailing Club, Chapin South Carolina