batteries in V-berth

moctrams · Post by **moctrams** » Nov 25th, '12, 12:00

I saw a post some time ago where a fellow CDr moved a battery bank to the open space beneath the V-berth. I had a local ship’s carpenter do the same for me. While at it, he replaced the two piece plywood cover. The old cover was fabricated in two pieces joined by a small piece of plywood above the holding tank. The new cover is made in three pieces and is stronger than the old design.

: V berth 5.JPG (124.4 KiB) Viewed 396 times

Russell · Post by **Russell** » Nov 27th, '12, 08:19

Job looks beautifully done. My only concern would be what size wire did you have to run aft? With a run that long I am imagining at least 2/0, and thats not cheap!

moctrams · Post by **moctrams** » Nov 27th, '12, 18:59

I have a calculated .1 volts drop.

The Cape Dory Board

batteries in V-berth

batteries in V-berth

Re: batteries in V-berth

Re: batteries in V-berth