Hi All...I am getting ready to make a new companionway door and wondered if anyone knew the dimensions. I will be going to the boat this weekend but wanted to try and get the material together before I can get there and measure.
Thanks in advance!
Jay
CD25 Companionway hatch panel size
Moderator: bobdugan
-
Jay B.
- Posts: 60
- Joined: Jun 23rd, '09, 16:04
- Location: Cape Dory 25 s/v little Ebby Rose Haven, MD. (sadly sold)
CD25 Companionway hatch panel size
CDSOA Member Number 1252
-
tartansailor
- Posts: 1523
- Joined: Aug 30th, '05, 13:55
- Location: CD25, Renaissance, Milton, DE
Re: CD25 Companionway hatch panel size
These are my board dimensions.
Width of bottom: 16 & 1/4"
Width of top: 24 & 1/4"
Center line height: 32 & 1/4"
Radius of arc: 7' 6" (h= 13/16")
Bottom angle: 108 degrees
Dick
Width of bottom: 16 & 1/4"
Width of top: 24 & 1/4"
Center line height: 32 & 1/4"
Radius of arc: 7' 6" (h= 13/16")
Bottom angle: 108 degrees
Dick
Viam Inveniam Aut Faciam
-
Jay B.
- Posts: 60
- Joined: Jun 23rd, '09, 16:04
- Location: Cape Dory 25 s/v little Ebby Rose Haven, MD. (sadly sold)
Re: CD25 Companionway hatch panel size
Thats perfect, thank you very much Dick.
BTW...is the board something like 5/8" thick?
Jay
BTW...is the board something like 5/8" thick?
Jay
CDSOA Member Number 1252