cape dory 27 design question?

Discussions about Cape Dory, Intrepid and Robinhood sailboats and how we use them. Got questions? Have answers? Provide them here.

Moderator: Jim Walsh

Post Reply
john tsampas

cape dory 27 design question?

Post by john tsampas »

I recently purchased a cape dory 27 hull #48. As i am new to sailing and this is my first sail boat I am learning alot, and the boat is very forgiving. Can somebody tell me what the opening in the bulkhead under the sink is intended for. There is a wire basket type thing on the other side in the engine compartment.

My boat has a yanmar YSB8 one banger! The engine runs great but seems
a little underpowered. I was wondering if a three blade prop will help. Not only in accelleration but in top end speed.
Steve I.

Re: cape dory 27 design question?

Post by Steve I. »

john tsampas wrote: I recently purchased a cape dory 27 hull #48. As i am new to sailing and this is my first sail boat I am learning alot, and the boat is very forgiving. Can somebody tell me what the opening in the bulkhead under the sink is intended for. There is a wire basket type thing on the other side in the engine compartment.

My boat has a yanmar YSB8 one banger! The engine runs great but seems
a little underpowered. I was wondering if a three blade prop will help. Not only in accelleration but in top end speed.
Power can be lost at the exhaust mixing elbow if it is old it plugs up with rust and corosion. This will also cause over heating on a long run and at high RPMs. Just a thought



chiping@tcol.net
Post Reply