New table

Forrest · Post by **Forrest** » May 12th, '11, 00:21

https://picasaweb.google.com/1094589667 ... directlink

sfreihofer · Post by **sfreihofer** » May 12th, '11, 21:42

Forrest!

Where, oh where, did you get the sliding bar hinge? This is exactly what I've been looking for and can't find. Do you have a source? Please, OH PLEASE!

Stan Freihofer
1981 CD25 #794
Ft. Lauderdale

Forrest · Post by **Forrest** » May 13th, '11, 05:12

I was unable to find a source for the hardware. I acquired my sliding assembly from a fellow CD owner who was reworking the interior of his boat.

You should be able to fabricate the assembly out of metal or wood. Here's a link to the photo album containing 2 pictures of the assembly (pictures 1 & 2).

http://s1232.photobucket.com/albums/ff3 ... 010256.jpg

Here's a link to the thread of my previous post on the same topic.

http://www.capedory.org/board/viewtopic.php?t=27749

Hope this helps,

Forrest

sfreihofer · Post by **sfreihofer** » May 13th, '11, 21:40

Thank you Forrest! That is very helpful indeed. It seems fabrication is the only viable alternative. I have been unable to locate a source... perhaps because I'm not sure what the fitting is called, which makes it difficult to search for.

I appreciate your photos. Thanks for taking the time.

Stan Freihofer
1981 CD25 #794
Ft. Lauderdale
www.ReefRoof.com