Mast Light & Water

[hwh888]

My mast light has water inside the globe & I'm not sure how to disassemble to correct problem.

Link to photo's
http://picasaweb.google.com/hwh888/CD22MastTop

I removed the two screws at top & thought the top would twist off to access the bulb & inside. Not sure because I could not loosen the top & don't want to break things in the process.
Anyone know how to get to the inside of this light?

[Neil Gordon]

I followed the link but there's no picture there.

[Steve Laume]

No Picture but an entertaining line I might have to keep in mind.

"Oops... there's nothing to see here."

Sounds like something you might want to say when you get caught doing something you shouldn't be seen doing, Steve.

[Oswego John]

With my Picasa account, there are two ways to show a picture.

One way is to show it privately. Only those who know the password can view the photo.

The other way is for the account owner to click on "Share" (with friends)

By clicking "Share", you unlock your pix for all to view.

Good luck,
O J

[Cathy Monaghan]

Hi Harry,

Read the "Sticky" message in our "Cape Dory Eye Candy" forum. It will help you include your Picasa photos in your posts. I've included the a link to the Sticky message below:

Sticky: If you use Google's Picasa for photos..... - Cathy Monaghan

Have fun,
Cathy
Webmaster - CDSOA, Inc.
CD32 Realization, #3

[hwh888]

Sorry everyone.......
Should be viewable by anyone?

http://picasaweb.google.com/lh/sredir?u ... bEuAE&feat

[Jim Davis]

Follow the link below. You twist the lens off the base. There are a couple variants, but see pages 5, 6 & 7.

http://www.aquasignal.info/aquasignal_u ... ,42,50.pdf

[hwh888]

Thanks everyone for the feedback. The lens was a simple twist off from the base.