CD26 bilge access recessed handle

Discussions about Cape Dory, Intrepid and Robinhood sailboats and how we use them. Got questions? Have answers? Provide them here.

Moderator: Jim Walsh

Post Reply
Rich

CD26 bilge access recessed handle

Post by Rich »

The little bilge access plate in my cabin sole is missing the recessed handle. I see Rockler has a bright brass handle that might work, although I would have to enlarge the recessed area. Does anyone know of an exact replacement source and could you describe the finish on the handle.

Happy to be sailing,

Rich Passmore
CD26 "Shearwater"
Stillwater, MN



rpassmore42@hotmail.com
Dana

Re: CD26 bilge access recessed handle

Post by Dana »

It is a recessed brass ring, same material as the plate itself. Finger thru the center and lift.....sounds like someone may have left it in the up position and accidently kicked it off....

________________________
Rich wrote: The little bilge access plate in my cabin sole is missing the recessed handle. I see Rockler has a bright brass handle that might work, although I would have to enlarge the recessed area. Does anyone know of an exact replacement source and could you describe the finish on the handle.

Happy to be sailing,

Rich Passmore
CD26 "Shearwater"
Stillwater, MN


darenius@aol.com
Rich

Re: CD26 bilge access recessed handle

Post by Rich »

Nothing is there, just the routed out area where the plate and ring once were.
Dana wrote: It is a recessed brass ring, same material as the plate itself. Finger thru the center and lift.....sounds like someone may have left it in the up position and accidently kicked it off....

________________________
Rich wrote: The little bilge access plate in my cabin sole is missing the recessed handle. I see Rockler has a bright brass handle that might work, although I would have to enlarge the recessed area. Does anyone know of an exact replacement source and could you describe the finish on the handle.

Happy to be sailing,

Rich Passmore
CD26 "Shearwater"
Stillwater, MN


rpassmore42@hotmail.com
Dana

Re: CD26 bilge access recessed handle

Post by Dana »

I'll take a look at it this weekend and let you know if it has a manfacturer's label on it....

Dana
_________

Rich wrote: Nothing is there, just the routed out area where the plate and ring once were.
Dana wrote: It is a recessed brass ring, same material as the plate itself. Finger thru the center and lift.....sounds like someone may have left it in the up position and accidently kicked it off....

________________________
Rich wrote: The little bilge access plate in my cabin sole is missing the recessed handle. I see Rockler has a bright brass handle that might work, although I would have to enlarge the recessed area. Does anyone know of an exact replacement source and could you describe the finish on the handle.

Happy to be sailing,

Rich Passmore
CD26 "Shearwater"
Stillwater, MN


darenius@aol.com
Post Reply