teak "drawer pulls"

Discussions about Cape Dory, Intrepid and Robinhood sailboats and how we use them. Got questions? Have answers? Provide them here.

Moderator: Jim Walsh

Post Reply
Andrew Blight

teak "drawer pulls"

Post by Andrew Blight »

I need to replace a couple of the round teak "drawer pulls" in the sliding doors for the galley of my CD30. Does anyone know of a retail source? Teak Connection (Maritime Lumber) of FL used to carry them. They were manufactured by a company called AFI, but I cannot find a contact for them or any retailers of their parts. Thanks.
AB
john

Re: teak "drawer pulls"

Post by john »

Andrew Blight wrote: I need to replace a couple of the round teak "drawer pulls" in the sliding doors for the galley of my CD30. Does anyone know of a retail source? Teak Connection (Maritime Lumber) of FL used to carry them. They were manufactured by a company called AFI, but I cannot find a contact for them or any retailers of their parts. Thanks.
AB
defender has the oval ones. did you try the special order dept at West?
Catherine Monaghan

Re: teak "drawer pulls"

Post by Catherine Monaghan »

Andrew,

<a href="http://www.marinco2.com/afi.asp">AFI</a> is the manufacturer of SEATEAK and they are a division of <a href="http://www.marinco2.com/">Marineco</a>, you know, the people who make the shore power cords.

Other divisions of Marinco are: <a href="http://www.marinco2.com/nicro.asp">Nicro</a> (cowl vents, solar vents, etc.) and <a href="http://www.chargepro.com/">Guest</a> (battery chargers, etc.)

Bookmark <a href="http://www.marinco.com/">http://www.marinco.com/</a> and you'll have access to all of them from one spot.

Hope you can find what you're looking for.

catherine_monaghan@merck.com
CD32 <a href="http://www.hometown.aol.com/bcomet/real ... ization</a>, #3
Rahway, NJ
Raritan Bay

Andrew Blight wrote: I need to replace a couple of the round teak "drawer pulls" in the sliding doors for the galley of my CD30. Does anyone know of a retail source? Teak Connection (Maritime Lumber) of FL used to carry them. They were manufactured by a company called AFI, but I cannot find a contact for them or any retailers of their parts. Thanks.
AB


catherine_monaghan@merck.com
Catherine Monaghan

Here are AFI's part numbers for the round pulls

Post by Catherine Monaghan »

<a href="http://www.marinco2.com/showProduct.asp ... ">60120</a> Round Teak Drawer Knob - 2 Inch Diameter - 2 Pack
<a href="http://www.marinco2.com/showProduct.asp ... ">60127</a> Round Drawer Teak Pull - 1-3/8 Inch Round - 2 Pack

Cathy
Catherine Monaghan wrote: Andrew,

<a href="http://www.marinco2.com/afi.asp">AFI</a> is the manufacturer of SEATEAK and they are a division of <a href="http://www.marinco2.com/">Marineco</a>, you know, the people who make the shore power cords.

Other divisions of Marinco are: <a href="http://www.marinco2.com/nicro.asp">Nicro</a> (cowl vents, solar vents, etc.) and <a href="http://www.chargepro.com/">Guest</a> (battery chargers, etc.)

Bookmark <a href="http://www.marinco.com/">http://www.marinco.com/</a> and you'll have access to all of them from one spot.

Hope you can find what you're looking for.

catherine_monaghan@merck.com
CD32 <a href="http://www.hometown.aol.com/bcomet/real ... ization</a>, #3
Rahway, NJ
Raritan Bay

Andrew Blight wrote: I need to replace a couple of the round teak "drawer pulls" in the sliding doors for the galley of my CD30. Does anyone know of a retail source? Teak Connection (Maritime Lumber) of FL used to carry them. They were manufactured by a company called AFI, but I cannot find a contact for them or any retailers of their parts. Thanks.
AB


catherine_monaghan@merck.com
Catherine Monaghan

Part numbers for Barrell pulls

Post by Catherine Monaghan »

<a href="http://www.marinco2.com/showProduct.asp ... ">60145</a> Teak Finger Pull - 5/8 Inch Barrel Length
<a href="http://www.marinco2.com/showProduct.asp ... ">60146</a> Teak Finger Pull - 1 Inch Barrel Length

Catherine Monaghan wrote: <a href="http://www.marinco2.com/showProduct.asp ... ">60120</a> Round Teak Drawer Knob - 2 Inch Diameter - 2 Pack
<a href="http://www.marinco2.com/showProduct.asp ... ">60127</a> Round Drawer Teak Pull - 1-3/8 Inch Round - 2 Pack

Cathy
Catherine Monaghan wrote: Andrew,

<a href="http://www.marinco2.com/afi.asp">AFI</a> is the manufacturer of SEATEAK and they are a division of <a href="http://www.marinco2.com/">Marineco</a>, you know, the people who make the shore power cords.

Other divisions of Marinco are: <a href="http://www.marinco2.com/nicro.asp">Nicro</a> (cowl vents, solar vents, etc.) and <a href="http://www.chargepro.com/">Guest</a> (battery chargers, etc.)

Bookmark <a href="http://www.marinco.com/">http://www.marinco.com/</a> and you'll have access to all of them from one spot.

Hope you can find what you're looking for.

catherine_monaghan@merck.com
CD32 <a href="http://www.hometown.aol.com/bcomet/real ... ization</a>, #3
Rahway, NJ
Raritan Bay

Andrew Blight wrote: I need to replace a couple of the round teak "drawer pulls" in the sliding doors for the galley of my CD30. Does anyone know of a retail source? Teak Connection (Maritime Lumber) of FL used to carry them. They were manufactured by a company called AFI, but I cannot find a contact for them or any retailers of their parts. Thanks.
AB


catherine_monaghan@merck.com
John Isbister (Aries)

Re: teak "drawer pulls"

Post by John Isbister (Aries) »

john wrote:
Andrew Blight wrote: I need to replace a couple of the round teak "drawer pulls" in the sliding doors for the galley of my CD30. Does anyone know of a retail source? Teak Connection (Maritime Lumber) of FL used to carry them. They were manufactured by a company called AFI, but I cannot find a contact for them or any retailers of their parts. Thanks.
AB
defender has the oval ones. did you try the special order dept at West?
Post Marine has the round ones.



janeisbist@aol.com
Post Reply