Need help locating a swim laddar for a Typhoon.. Any help with a dist.etc Thanks
JKAYESCULP@aol.com
Swim Laddar for a Typhoon
Moderator: Jim Walsh
-
Richard Stephens
Re: Swim Laddar for a Typhoon
John,
The only thing to watch out for is that you seal the deck core when you mount the sockets. For each screw, drill a good sized hole (say 3/8"), fill with epoxy putty or thickened epoxy, then drill a small hole for the screw into the epoxy.
Regards,
Richard (Ty "Blue Diamond")
richard@memory-map.com
Mine is very similar to one in the West Marine catalog: Garelick part number #10049. It hooks into mounting sockets attached to the deck, about midships. Works great.John Kaye wrote: Need help locating a swim laddar for a Typhoon.. Any help with a dist.etc Thanks
The only thing to watch out for is that you seal the deck core when you mount the sockets. For each screw, drill a good sized hole (say 3/8"), fill with epoxy putty or thickened epoxy, then drill a small hole for the screw into the epoxy.
Regards,
Richard (Ty "Blue Diamond")
richard@memory-map.com