Solar Vent Installation

[barfwinkle]

Here are two pics of the solar vent install. I have the hole cut and am waiting on weather and weekends so I can fill the void where I removed the balsa.

Fair Winds

Here you can see the hole with a portion of the balsa removed and the void between the coach top and the cabin liner.

<a href="http://i191.photobucket.com/albums/z209 ... G_3426.jpg" target="_blank"><img width="600" src="http://i191.photobucket.com/albums/z209 ... 6.jpg"></a>

And here is a shot of the actual plug I removed. Four layers (from top to bottom) gel coat/top layer of glass, balsa (1/2"), bottom layer of glass coach top, & the cabin liner. About 1" over all maybe a bit more. I didn't measure.

[Bruce Ebling]

Can you tell me where on the deck you are installing the unit? I am in the process of installing a Nicro Fico unit where the old dorade box was, which is just forward of the mast step.
Thanks
Bruce

[barfwinkle]

Directly in front of the mast. While it would fit on the coach top, when you looked below, it wouldn't fit.