I have just changed the subject on this post as Jim Buck has come to the rescue and posted the needed document below.
"Boom Vang Installation and Recommendations for Cape Dorys" from Spartin Marin is mentioned numerous times on the board, but the link appears to be no longer available: "Here's a copy of a spec sheet prepared by Spartan Marine showing the vang dimensions for most Cape Dory's:
http://www.jibeho.org/vang.htm"
So thanks to Jim you will find this info pasted below. Thanks too to Matt for linking us to some valuable information!
Spartin Marine spec sheet showing CD boom vang dimensions.
- OveRCs
- Posts: 21
- Joined: Dec 2nd, '09, 11:03
- Location: 1975 CD Typhoon "G" Model Open Daysailer Hull #24
Spartin Marine spec sheet showing CD boom vang dimensions.
Last edited by OveRCs on Dec 15th, '09, 14:43, edited 5 times in total.
Ron Campbell, Sandys Bermuda
May be of some help
Hi Ron -
The following link (recently passed on to me by Duncan -- thx!) is to Spartan hardware for vangs on a variety of CD spars. Not sure precisely what you are looking for, but this may get you closer to the mark. If not, perhaps you can try going up a level in the rigrite web page and seeing if the information isn't there.
http://rigrite.com/Spars/SparParts/Boom_bails.html
Matt
The following link (recently passed on to me by Duncan -- thx!) is to Spartan hardware for vangs on a variety of CD spars. Not sure precisely what you are looking for, but this may get you closer to the mark. If not, perhaps you can try going up a level in the rigrite web page and seeing if the information isn't there.
http://rigrite.com/Spars/SparParts/Boom_bails.html
Matt
RE: Spartan vang specs
Hope this is what you were looking for. I saved this from an old post:
Jim Buck
Member #1004
Member #1004