CD30 Parts

JWSutcliffe · Post by **JWSutcliffe** » Aug 3rd, '09, 16:02

I have an original v-berth filler piece with cushion for CD30. Also replacement v-belt, raw water impeller and fuses for Volvo MD7A. Make me an offer - these are just cluttering up my shop.

Rebinva · Post by **Rebinva** » Aug 4th, '09, 20:17

Do you, by chance, know if the 30 filler is close to a match for the 28 filler? I have never been on a 30, but I know that they are very close in dimensions to a 28.

JWSutcliffe · Post by **JWSutcliffe** » Aug 7th, '09, 08:34

I dont know if there are any differences between the v-berths on the 28 and 30. The filler piece is 25 inches wide at one end, 10 1/2 inches wide at the narrow end, and 31 inches long overall. Cushion and cover are good.

Rebinva · Post by **Rebinva** » Aug 7th, '09, 18:15

I'll check the measurements when I am next at the boat. That might be a couple of weeks though. Maybe you'll still have the filler by then.

Rebinva · Post by **Rebinva** » Aug 7th, '09, 22:12

just sent you a pm.

Rebinva · Post by **Rebinva** » Sep 25th, '09, 20:47

the cost of sending the v berth filler?

mgphl52 · Post by **mgphl52** » Sep 26th, '09, 10:25

JWSutcliffe wrote:I have an original v-berth filler piece with cushion for CD30. Also replacement v-belt, raw water impeller and fuses for Volvo MD7A. Make me an offer - these are just cluttering up my shop.

Is the v-berth filler still available?

Rebinva · Post by **Rebinva** » Oct 6th, '09, 18:29

Rebinva · Post by **Rebinva** » Nov 6th, '09, 21:55

zzzzz

The Cape Dory Board

CD30 Parts

CD30 Parts

V berth filler

Thanks

On second thought

JW Have you had a chance to look into

Re: CD30 Parts

Bump

J W you any where about??