Wanted-Bronze Jib Boom Pedestal

Selling or looking for a Cape Dory? Selling or looking for used gear? List your "Wanted to Buy" or "For Sale" items here.
Post Reply
Will Angus
Posts: 22
Joined: Sep 30th, '05, 15:18
Location: CD30 #252 Deltaville, VA

Wanted-Bronze Jib Boom Pedestal

Post by Will Angus »

My CD30 came converted to a sloop rig and the pedestal was removed. I???d like to set up the staysail, so If you have removed your pedestal and want to sell it, just let me know.

If I don't get lucky here, I found this on rig rite. It appears correct with language like "origional cape dory", but still would appreciate another opinion.

Bronze Jib Boom Pedestal, 5 1/2" high - Casting only: SP-566C:
Bronze Jib Boom Pedestal, 5 1/2" high w/ Integral Swivel & Pin: SP-566BA-__:
Original Cape Dory Cast Bronze Jib Boom Pedestal has been used with a variety of SS Swivel fittings. Cast Pedestal only is available with 1/2" hole in top, or specify the Boom attachment details for an appropriate SS Swivel and Pin. Base is (maximum) 4" long x 4 1/8" wide and attaches to Deck with (5) 1/4" FH screws. As used on a variety of Cape Dory's.
[/quote]
________
Herbal health
Last edited by Will Angus on Feb 13th, '11, 09:36, edited 1 time in total.
John Stone
Posts: 3623
Joined: Oct 6th, '08, 07:30
Location: S/V Far Reach: CD 36 #61 www.farreachvoayges.net www.farreachvoyages.com

Post by John Stone »

Hi Will,
I have my bronze staysail pedestal off my CD 36 and would be happy to let it go. Measurements are 5 3/8" high with a foot print of approximately 3 1/2" by 3." It's a five bolt pattern.

John
Post Reply