9M Intrepid owners out there?

[grania]

Im having a heck of a time purchacing a holding tank for my CD-the old one (under the V-birth)had been removed prior to me purchasing the boat and the holding space in which Id put a new one is very difficult to measure-far more complex than a simple rectangle. Ive spoken with Kracow Distribuors who did make a number of CD tanks, but we're having trouble figuring this model out. I would be thrilled if anyone out there had any specs, model number ANYTHING that could hel me figure out what tank to put in the boat. Thanks! Aine

[Cathy Monaghan]

Try sending an email to Dave Perry at Robinhood Marine Center. With any luck he may be able to help. Send your email to:
perry [at] robinhoodmarinecenter [dot] com
Who knows, they may have kept track of those tank model numbers.



Cathy
CD32 Realization, #3
Rahway, NJ
Raritan Bay

[Joe Mac Phee]

My understanding is that the Kracor model 2-6256 was used on the I9M,CD-28, CD-30, I-28, I-35, and CD-36. The implication would also be that the similar Ronco tank would also fit. these same boats.

The Ronco tank that I installed in my CD-30 was supplied with the fitting placement custom designed for my application.

Good luck,

Joe Mac Phee

[grania]

Thanks for your help. I did find a tank at Kracor that another CD 9Mtr owner swore 'fits snuggly' into the boat. Its on order, and I will hope for the best! Im at work now and have the mold/model # at home but would be happy to share it with anyone else whos looking. Thanks again! Aine