The Cape Dory Board

Yes Robert Spencer. https://marinesurveyrochester.com/ He sails out of Brockport Yacht Club.

Just replaces my Keynon 2 burner marine stove with a Cookmate. Stove worked great SOMETIMES and other times started the curtains on fire. Could never figure the damn thing out. 1980 vintage. New pump rubbers. Free ...just pay shipping.

Tighting the bobstay till bar tight I was able to get the aft part of the bow sprit to release by using a a flat pry bar with a piece of plasitc under the prybar so I didn't gouge the gelcote . It is still holding on where the bow attaches. Hitting with a dead blow hammer yeilded no results. I am wa...

Thanks for the advice. I removed the bob stay before trying to remove. I will reattach and tighten it up. As for the mast, It has been down since Labor day...Lake Ontario is VERY low.

Trying to remove my wood Bow Sprit on my CD28. I was able to get most of the stainless steel bolts out but had to cut two nuts off with an abraisive wheel. The two bolts are still in the wood and flush with the steel plate below the sprit. It doesn't appear that they are threaded into the steel plat...