I am looking a buying a Campbell Sailer 3 bladed prop from West By North. Does any one have one and can you tell me about the prop and the company? I also need the following information:
1. Rotation of prop
2. Diameter and Pitch of original prop
3. Shaft size
4. Transmission, make, model and ratio of original
5. Aperture Restriction, top an bottom
Thank You
Karl Sidenius
Tranquility 25D #43
sidenius@villagenet.com
Prop information 25D
Moderator: Jim Walsh
-
Catherine Monaghan
Re: Prop information 25D
Karl,
Do you subscribe to Practical Sailor? They did an article on propellers in the 1/1/95 issue, vol. 21. no. 1. The Campbell Sailer is one of the props that was tested. You should be able to get some info from that article.
Also, West by North Enterprises has a website. If you haven't found it already, they're at: <a href="http://www.westbynorth.com/">http://www ... th.com/</a>
The company that manufacturers the Campbell Sailer is:
Camar Industries
1259 Stewart Avenue
Nanaimo, B.C., V9S 4C9
Fax: (250) 755-4010
Telephone: (250) 755-2000
You may be able to contact Camar Industries by e-mail. Try this address: hubcity@nanaimo.ark.com
catherine_monaghan@merck.com
CD32 <a href="http://www.hometown.aol.com/bcomet/real ... ization</a>, #3
Rahway, NJ
Raritan Bay
catherine_monaghan@merck.com
Do you subscribe to Practical Sailor? They did an article on propellers in the 1/1/95 issue, vol. 21. no. 1. The Campbell Sailer is one of the props that was tested. You should be able to get some info from that article.
Also, West by North Enterprises has a website. If you haven't found it already, they're at: <a href="http://www.westbynorth.com/">http://www ... th.com/</a>
The company that manufacturers the Campbell Sailer is:
Camar Industries
1259 Stewart Avenue
Nanaimo, B.C., V9S 4C9
Fax: (250) 755-4010
Telephone: (250) 755-2000
You may be able to contact Camar Industries by e-mail. Try this address: hubcity@nanaimo.ark.com
catherine_monaghan@merck.com
CD32 <a href="http://www.hometown.aol.com/bcomet/real ... ization</a>, #3
Rahway, NJ
Raritan Bay
Karl Sidenius wrote: I am looking a buying a Campbell Sailer 3 bladed prop from West By North. Does any one have one and can you tell me about the prop and the company? I also need the following information:
1. Rotation of prop
2. Diameter and Pitch of original prop
3. Shaft size
4. Transmission, make, model and ratio of original
5. Aperture Restriction, top an bottom
Thank You
Karl Sidenius
Tranquility 25D #43
catherine_monaghan@merck.com
-
Lee H. Hodsdon
Re: Prop information 25D
Karl,
I have a Campbell 3 blade and love it. A great improvement over the old Michigan.
You will need to provide West by North with specific engine information, as the prop requirements vary with engines. Mine is a Westerbeke 10-2, if yours is the same I can provide the info. Go to the web site which Catherine provided for a better description.
Sincerely,
Lee
lhodsdon@nh.ultranet.com
I have a Campbell 3 blade and love it. A great improvement over the old Michigan.
You will need to provide West by North with specific engine information, as the prop requirements vary with engines. Mine is a Westerbeke 10-2, if yours is the same I can provide the info. Go to the web site which Catherine provided for a better description.
Sincerely,
Lee
lhodsdon@nh.ultranet.com