If Carl Alberg was designing boats today

Discussions about Cape Dory, Intrepid and Robinhood sailboats and how we use them. Got questions? Have answers? Provide them here.

Moderator: Jim Walsh

Post Reply
Paul D.
Posts: 1273
Joined: Feb 6th, '05, 20:52
Location: CD 33 Femme du Nord, Lake Superior

If Carl Alberg was designing boats today

Post by Paul D. »

Wintertime in MN is a long, sail less period. It is a good time to ponder stuff. So a recent post got me thinking.

If Carl Alberg were alive and designing sailboats today, what would they look like? What sort of gear would he incorporate to meet his design goals assuming they never changed. What modern designs do you think come closest to fulfilling his design goals of safe and seaworthy yachts, where you don't need a crew to sit on the rail to keep her upright, with enough sail area to move?
Paul
CDSOA Member
Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

Re: If Carl Alberg was designing boats today

Post by Jim Walsh »

My candidate.....make mine a cutter rig and don’t forget wheel steering Carl. What’s that! Oh yes Carl, I will certainly remember to leave my prop in the fixed position when sailing.
You do not have the required permissions to view the files attached to this post.
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
User avatar
gonesail
Posts: 233
Joined: Jun 22nd, '19, 16:39
Location: CD30 MKII FLORIDA

Re: If Carl Alberg was designing boats today

Post by gonesail »

Jim Walsh wrote:My candidate.....make mine a cutter rig and don’t forget wheel steering Carl. What’s that! Oh yes Carl, I will certainly remember to leave my prop in the fixed position when sailing.

Very nice. Is that a Perry design?
Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

Re: If Carl Alberg was designing boats today

Post by Jim Walsh »

gonesail wrote:
Jim Walsh wrote:My candidate.....make mine a cutter rig and don’t forget wheel steering Carl. What’s that! Oh yes Carl, I will certainly remember to leave my prop in the fixed position when sailing.

Very nice. Is that a Perry design?
Yes. He has done some fabulous cruising designs.
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
User avatar
Steve Laume
Posts: 4127
Joined: Feb 13th, '05, 20:40
Location: Raven1984 Cape Dory 30C Hull #309Noank, CT
Contact:

Re: If Carl Alberg was designing boats today

Post by Steve Laume »

That is an interesting design. It would create some challenges when rigging any sort of self steering.

I don't think Carl would have strayed that far, Steve.
Bill Goldsmith
Posts: 625
Joined: Feb 7th, '05, 08:47
Location: CD 32

Re: If Carl Alberg was designing boats today

Post by Bill Goldsmith »

Alberg was obviously an adamant proponent of the cutaway forefoot full keel and I don't think he would have strayed far from that. Every CD model he designed, the Ensign, the Triton, the Sea Sprite 23 and other Alberg designs all followed this approach. I think he would have continued designing models like that but probably would have encouraged builders to update to more modern resins, systems and layouts, all within his preferred hull design. It would have been a tough sell to the marketplace, though, because his biggest competition would have been all the well found older models still out there being sailed and loved.
Bill Goldsmith
Loonsong
Cape Dory 32 Hull #2
Post Reply