I am looking for a US made, forged double clevis... (clevis at each end). Galvanized would be nice but not critical. The one that came yesterday from McMaster Carr, the heads of the pins are labeled "China."
Any suggestions?
Thanks!
Source for US Made double clevis
Moderator: Jim Walsh
-
Bob Ohler
- Posts: 610
- Joined: Feb 5th, '05, 14:11
- Location: CD30 1984 Hull# 335 Aloha Spirit, Chesapeake Bay
Source for US Made double clevis
Bob Ohler
CDSOA Member #188
CD30B, Hull # 335
sv Aloha Spirit
CDSOA Member #188
CD30B, Hull # 335
sv Aloha Spirit
-
Bill Goldsmith
- Posts: 625
- Joined: Feb 7th, '05, 08:47
- Location: CD 32
Re: Source for US Made double clevis
Bob,
I would call the guys at Rigging Only (The Rigging Loft) in Fairhaven MA. I have had them make up shrouds and stays for me three times over the years and they are great. They carry Hayn Rigging products which I believe are manufactured in CT.
I would call the guys at Rigging Only (The Rigging Loft) in Fairhaven MA. I have had them make up shrouds and stays for me three times over the years and they are great. They carry Hayn Rigging products which I believe are manufactured in CT.
Bill Goldsmith
Loonsong
Cape Dory 32 Hull #2
Loonsong
Cape Dory 32 Hull #2
Re: Source for US Made double clevis
Try 1st Chain Supply in MO.
They have galvanized shackles as strong as the chain, without going up a size.
https://www.1st-chainsupply.com
They have galvanized shackles as strong as the chain, without going up a size.
https://www.1st-chainsupply.com
I'm disinclined to acquiesce to your request. Means no.