New Paint

Don't forget to snap some photos while you work on that boat project, then share them here.

Moderator: bobdugan

Post Reply
K Chiswell
Posts: 104
Joined: Aug 5th, '10, 11:30
Location: CD 330, New Song

New Paint

Post by K Chiswell »

We just finished repainting our boat. There is still a lot of work to do to put it all back together but I thought I would share a few photos

Ready for Paint
Image

Topsides painted
Image

Taping the waterline
Image

About to load on the truck
Image

On the ramp
Image
hilbert
Posts: 492
Joined: Nov 17th, '09, 08:27
Location: "The Boat" CD28

Re: New Paint

Post by hilbert »

As one who jumps from one never ending project to the next, I am always impressed by others who accomplish tasks.
Since I can't fathom how this is accomplished, I have so many questions.

How did you find a climate controlled place for the work?
How was the old paint removed?
What was the repair to the fiberglass on the starboard side, behind the ladder in the top picture?
What paint did you use and how was it applied?

Well done,
User avatar
oldragbaggers
Posts: 234
Joined: Nov 28th, '05, 21:01
Location: 1982 CD-33 "Anteris"
Contact:

Re: New Paint

Post by oldragbaggers »

Just gorgeous. She won't just turn heads....she'll break necks.
Lance & Becky Williams
Happily retired and cruising aboard our dreamboat, Anteris
http://www.sailblogs.com/member/anteris/
https://www.facebook.com/oldragbaggers
K Chiswell
Posts: 104
Joined: Aug 5th, '10, 11:30
Location: CD 330, New Song

Re: New Paint

Post by K Chiswell »

As one who jumps from one never ending project to the next, I am always impressed by others who accomplish tasks.
Since I can't fathom how this is accomplished, I have so many questions.

How did you find a climate controlled place for the work? Incredible luck! A good friend bought the build a few weeks before I pulled my boat with a plan to renovate in about 3 years. I used it all.
How was the old paint removed? The bottom was soda blasted, the rest was gelcoat sanded before painting.
What was the repair to the fiberglass on the starboard side, behind the ladder in the top picture? Where I filled the thru hulls.
What paint did you use and how was it applied? We sprayed on Metacryl, an acrylic urethane (so is Allcraft 2000). Not being in a boat yard I was able to find a custom car painter to do it at a fraction of the cost of what I have heard others pay.
I understand the feeling of projects not being finished. I pulled the boat out of the water October 2011 for the winter and launched it last week far from complete. See my answers above in blue.
User avatar
Keyscaptainadam
Posts: 78
Joined: Aug 20th, '12, 16:33
Location: velella and flor del sol

Re: New Paint

Post by Keyscaptainadam »

truly a smart , efficient, and cost-effective method to painting the boat.

adam
SV velella
S/V Velella .... CD 25 moored in Cold Spring Harbor, Long Island, NY
Sailing long island waters since 2009
http://www.adam-waywell.squarespace.com/
wsfanning
Posts: 62
Joined: May 5th, '14, 10:16
Location: S/V "Muse" '78 Typhoon #1524, Sandusky Sailing Club, Sandusky, OH

Re: New Paint

Post by wsfanning »

That"s a stunning paint job! Great work!
Post Reply