CD25D engine compartment floor/bilge question
Moderator: Jim Walsh
- Dick Kobayashi
- Posts: 596
- Joined: Apr 2nd, '05, 16:31
- Location: Former owner of 3 CDs, most recently Susan B, a 25D
Re: CD25D engine compartment floor/bilge question
Sounds like everything is fine. If you are fussy or practical just put a few drops of dish detergent in the molded pan under the engine and it will keep oils in suspension. Remember when the pan gets full the overspill just goes into the bilge. I squirt a little dish detergent in the bilge after each time I pump it. It really helps. The oils are pumped right out with the sea water. Remember - it is a boat all water heads for the bilge eventually. Enjoy yourself.
Dick K
CD 25D Susan B #104
Mattapoisett, MA
Fleet Captain - Northeast Fleet 2014/2015
Tempus Fugit. And not only that, it goes by fast. (Ron Vacarro 1945 - 1971)
CD 25D Susan B #104
Mattapoisett, MA
Fleet Captain - Northeast Fleet 2014/2015
Tempus Fugit. And not only that, it goes by fast. (Ron Vacarro 1945 - 1971)