CD36 POWERBOAT HEAD & WASHDOWN PUMP

[JIM MANNING]

I'am new to this 36' CD power boat, 2 problems I'm having are the eletric model K toilet is flushing but not drawing in water??
Problem #2 I can't find a washdown pump and can't belive there is not one. The breaker panel has a breaker labeled washdown pump but the wire coming from the breaker dead ends at the buzz bar. If there is no pump can I get some ideas on the best way to install one. THANK YOU JIM.



NH10D@AOL.COM

[Jim Hojlo]

I'am new to this 36' CD power boat, 2 problems I'm having are the eletric model K toilet is flushing but not drawing in water??
Problem #2 I can't find a washdown pump and can't belive there is not one. The breaker panel has a breaker labeled washdown pump but the wire coming from the breaker dead ends at the buzz bar. If there is no pump can I get some ideas on the best way to install one. THANK YOU JIM. There is a teflon ring on the piston,and there is a valve(one

way) bothe are in the rebuild kit for an elec.K,and think of all the fun you'll have.



jhojlo@ultrablend.com

[Walt Bilofsky]

Problem #2 I can't find a washdown pump and can't belive there is not one. The breaker panel has a breaker labeled washdown pump but the wire coming from the breaker dead ends at the buzz bar.

Just because there's a breaker doesn't mean there's a pump. On my CD 30 powerboat, there's a breaker labeled "Microwave" but no microwave. Looks like they used one power panel, pre-labeled, regardless of what options were installed. But at least they gave you the breaker.

That's a nice boat.



bilofsky@toolworks.com