Last weekend I started work on replacing some of the standing rigging for Mahalo. I am using Sta-Lok fittings. I took some pictures of the process and assembled them into a web page in
the hope that it might be useful for others.
Here is a link:
<a href="http://sailmahalo.com/picture_collectio ... ngStaloks/ "> Installing Sta-Loc Fittings Web Page </a>
Installing Sta-Lok Fittings
Moderator: Jim Walsh
- bottomscraper
- Posts: 1400
- Joined: Feb 5th, '05, 11:08
- Location: Previous Owner of CD36 Mahalo #163 1990
- Contact:
Installing Sta-Lok Fittings
Last edited by bottomscraper on Oct 1st, '06, 15:18, edited 1 time in total.
Rich Abato
Nordic Tug 34 Tanuki
Previous Owner Of CD36 Mahalo #163
Southern Maine
http://www.sailmahalo.com
Nordic Tug 34 Tanuki
Previous Owner Of CD36 Mahalo #163
Southern Maine
http://www.sailmahalo.com
- David van den Burgh
- Posts: 597
- Joined: Feb 5th, '05, 18:54
- Location: Ariel CD36, 1979 - Lake Michigan
- Contact:
Nicely done
Rich,
Looks great! Thanks for taking the time to document and photograph the procedure in such detail; I'm sure it will prove useful to many. Now if we could just scrape together enough money to do the same on Ariel!
Cheers,
David (the younger)
Looks great! Thanks for taking the time to document and photograph the procedure in such detail; I'm sure it will prove useful to many. Now if we could just scrape together enough money to do the same on Ariel!
Cheers,
David (the younger)