CAPE DORY 28 FLY BRIDGE
Moderator: Jim Walsh
Re: CAPE DORY 28 FLY BRIDGE
Is that "neat" or what?
You may get a specific answer from someone on the board who has been there and done that, but I suggest that in lieu of that, you go to the Michigan Wheel web site (see link below) and get their analysis of the situation.
Best of boating,
Ken Coit
CD/14 #538
CD/36 #84 Parfait
Hailing Port: Raleigh, NC
Sailing from: Beaufort, NC
[img]http://www.michiganwheel.com/MIWheel/im ... i_main.gif[/img]
parfaitNOSPAM@nc.rr.com
You may get a specific answer from someone on the board who has been there and done that, but I suggest that in lieu of that, you go to the Michigan Wheel web site (see link below) and get their analysis of the situation.
Best of boating,
Ken Coit
CD/14 #538
CD/36 #84 Parfait
Hailing Port: Raleigh, NC
Sailing from: Beaufort, NC
kim petti wrote: WHAT IS THE LARGEST PROP FOR THIS BOAT DIAMETER AND PITCH
[img]http://www.michiganwheel.com/MIWheel/im ... i_main.gif[/img]
parfaitNOSPAM@nc.rr.com
Re: CAPE DORY 28 FLY BRIDGE
I run a 18"X 17" on the FB. A friend with a cruiser version runs a 18"X18" This is with a Chrysler gas engine.The diesel would be different.kim petti wrote: WHAT IS THE LARGEST PROP FOR THIS BOAT DIAMETER AND PITCH
TShel11523@aol.com
Re: CAPE DORY 28 FLY BRIDGE
We have 28 Flybridge with the 200 HP Volvo diesel and a new hydraulic tranmission. We just this year replaced our prop with a 4 bladed, 20" x 18 pitch. We have found that we have gained approximately 20% more speed and much better handling. Good luck!!kim petti wrote: WHAT IS THE LARGEST PROP FOR THIS BOAT DIAMETER AND PITCH
sandsend@attbi.com