Hi all,
I began to install my rails and coamings and i need an advise with the plugs of woods.
What will be the best way to seal the plugs on the mahogany, epoxy, a king of glue or nothing just push them on the holes. I want to paint with cetol after that.
By the way my "project boat" is almost at the end of the rebuilt process. this week i will paint the waterline and install all the trims woods(coamings, rails...).
Next week(if West Marine can deliver me my standard horizon sail pack) i will do the barrier coat and the antifouling. AFTER THAT I will be on the water youpi!
i will keep the interior for next spring i do'nt have anymore time or anymore money (ha! ha!).
Thank's
Marc
A22
Thank's
adrenaline@vif.com
Advise on wooden plugs
Moderator: Jim Walsh
Re: Advise on wooden plugs
Marc,
Check out the message thread below for advice on plugs.
Have fun!
Keep on sailing,
Ken Coit
CD/14 #538
CD/36 #84 Parfait
Hailing Port: Raleigh, NC
Sailing from: Beaufort, NC
parfaitNOSPAM@nc.rr.com
Check out the message thread below for advice on plugs.
Have fun!
Keep on sailing,
Ken Coit
CD/14 #538
CD/36 #84 Parfait
Hailing Port: Raleigh, NC
Sailing from: Beaufort, NC
parfaitNOSPAM@nc.rr.com